A&D SW-150KL Selecting a weighing unit, Basic weighing operation, Indicator will not turn on

8.2. Selecting a weighing unit

In the weighing mode, press the UNITS switch to select a weighing unit. Each time the UNITS switch is pressed, the unit changes as shown below.

Ib oz Ib-oz kg or g pcs

Using the function setting “Ut-g”, “kg” and “g” can be switched.

Ut-g 0 : To display “kg”.

Ut-g 1 : To display “g”.

Note: For the SW-60K / 150K, the function setting “Ut-g” is not available and only “kg” is displayed.

8.3. Basic weighing operation

1. Press the ON/OFF switch to turn the power ON. Container The unit used last before turning off appears.

2.	Select a weighing unit using the			UNITS	switch.
3.	When the display doesn’t show zero, press the
		ZERO	switch to set the display to zero.

4.When using a tare (container), place the container on the weighing pan, and press the

TARE switch to set the display to zero.

5.Place the object to be weighed on the weighing pan or in the container, and wait for the STABLE indicator to turn on and read the value.

6.Remove the object from the weighing pan.

‰The ZERO switch will zero the scale if the weight value is within ±2% of the weighing capacity (kg) around the power-on zero point. The ZERO indicator turns on.

Weighing pan

Press

NET

ZERO

Object to be weighed

STABLE

NET

‰ The TARE switch will tare the scale and subtract the weight to zero as a tare

weight when the weight is a plus value. The NET	and ZERO indicators turns
on.	indicator will not turn on
(Note: In some countries or areas, the ZERO
during the TARE operation.)

‰Weighing is possible up to the weighing capacity. When a tare is used, weighing is possible up to the weighing capacity less the tare weight value.

‰The ZERO stable.

and

TARE

switches function only when the weight values are

13