7.2.Installing the scale
1.Select the place for installing the scale. Refer to “4. PRECAUTIONS”.
2. Adjust the level of the base, using the spirit level and leveling feet. Confirm that the bubble is in the center of the level.
SW type with a display pole has an extra foot at the bottom of the pole. Adjust this foot to touch the floor after adjusting the level of the base.
Leveling foot
Spirit level
The size and shape depends on the scale model.
3. Adjust the display angle as follows. |
| |
Type with a display pole |
| |
(1) | Rotate the two display knobs |
|
| located on the display rear to |
|
| remove them. |
|
(2) | Tilt the display to an appropriate |
|
| angle, 0°, 30°, 60° or 90°. | Display |
(3) | Attach the two display knobs and |
|
| secure them firmly. |
|
Display knobs
Type with a display stand
(1)Loosen the two display knobs located on the sides of the display.
(2) | Tilt the display to an appropriate |
|
| angle. (Free setting angle) | Display |
|
| |
(3) | Tighten the two display knobs. |
|
Display knobs
4.Confirm that nothing is touching the switches and connect the AC power cable to an electrical outlet.
11