A&D SW-15KM Compliance with FCC rules, Classification of protection provided by enclosures

Page 5

1. COMPLIANCE

Compliance with FCC rules

Please note that this equipment generates, uses and can radiate radio frequency energy. This equipment has been tested and has been found to comply with the limits of a Class A computing device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable protection against interference when equipment is operated in a commercial environment. If this unit is operated in a residential area it might cause some interference and under these circumstances the user would be required to take, at his own expense, whatever measures are necessary to eliminate the interference.

(FCC = Federal Communications Commission in the U.S.A.)

Classification of protection provided by enclosures

The equipment is designed to comply with the IP Code of IEC 60529. The “IP69K” is explained as follows:

“IP”	International Protection.
“6”	Against ingress of solid foreign objects.
	Dust-tight. No ingress of dust.
“9K”	Against ingress of water with harmful effects.
	High pressure water jets directed against the enclosure from any direction
	shall have no harmful effects. (DIN40050 Part 9)

3

Image 5

Contents SW Series Page Contents Specifications MaintenanceOptions Gravity Acceleration MAPClassification of protection provided by enclosures ComplianceCompliance with FCC rules Introduction FeaturesInstalling the scale PrecautionsCleaning the scale Operating the scaleUnpacking Display rear side Description of Each PartSymbols Display and symbolsSymbol Description DisplaySwitches SW-M / L series with a display pole Setting UPAttaching the display pole to the base Installing the scale Basic Operation Turning the power on and OFFBat oo ON/OFFSelecting a weighing unit Indicator will not turn onBasic weighing operation During the Tare operationWeight display resolution Print Counting ModeComparator Five-level comparator modeFormula to compare LoloThree-level comparator mode Print Sample Tare Five-level comparator mode Three-level comparator modeEntering the comparator values Gravity acceleration correction CalibrationUnits Print Calibration using a weightRestoring the factory set values Tare ON/OFF Setting the parametersFunctions Function list Key Options Using the OP-02 SLA batteryInstalling the battery Charging the battery OP-03 RS-232C / Relay Output Installing OP-03Ascii OP-03 SpecificationsSolid sate relay ‰ Data example Command mode Stable positive data Page OP-04 RS-422 Installing OP-04OP-04 Specifications Example of connection RS-422 Stable data Error codes MaintenanceModel SW-6KS SW-15KS SW-15KM SW-30KM SpecificationsSpecifications SW-60KL Model SW-60KMExternal dimensions SW-60KL / SW-150KL with a display pole Values of gravity at various locations Gravity Acceleration MAPWorld map