Andis Company Model BGR BGRC manual Model Bgrc Cord Pack Use

WARNING: Upon removal, cover the battery pack’s terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

SAVE THESE INSTRUCTIONS

THIS PRODUCT IS INTENDED FOR COMMERCIAL USE

Model BGRC Cord Pack Use

1.Models BGRC/BGR+ will run on an average of 3800 SPM with the cord pack attached.

2.Models BGRC/BGR+ can be used with either the cord pack or the battery.

3.Remove the transformer wall plug and clipper from the carton.

4.With the clipper in the off position, insert the adapter plug into the bottom of the clipper. Note that the adapter plug is fitted with a tongue to align properly with the groove in the clipper. Once the adapter plug and clipper are aligned, press firmly together. You may hear a click as the adapter plug contacts engage.

5.Plug the transformer wall plug into the AC outlet as identified on the carton.

6.The clipper is now ready to be used.

See page 6 for clipper use

Tongue

Adapter

Plug

Transformer

Wall Plug

2