Braun Z40 manual Shaving, Cleaning, For best results, Using the rotating styler

Shaving

Remove the foil protection cap (1). Activate the on/off switch

(6). The floating foil frame automatically adapts to your skin surface for a close, smooth shave.

For best results:

•Always shave before washing your face.

•At all times, hold the shaver at right angles (90°) to the skin (b).

•Stretch the skin and shave against the direction of hair growth.

•For pre-shaving after a few days of not having shaved, use the wide shaper (4a) to pre-cut long hairs. For a close, smooth shave, finish with the foil.

•To maintain 100% shaving performance, replace your foil and cutter block at least every 18 months or when worn.

Using the rotating styler (4)

The wide shaper (4a) evenly cuts and trims large areas. It is ideal for shaping sideburns, moustaches and partial short beards. The wide shaper is provided with safety rips and a gliding strip for less irritation and easy gliding.

Press the green stripes (c) to push up the rotating styler (4). While stretching the skin, guide the wide shaper against the direction of hair growth.

The narrow shaper (4b) precisely defines lines and edges (d), being ideal for precise contouring.

To use the narrow shaper, push up the styler and turn it 180°.

Frequent use of the styler (4) will reduce the battery capacity.

Cleaning

This appliance is suitable for cleaning under an open water tap.

Warning: Detach the hand-held part from the power supply before cleaning it in water.

Regular cleaning ensures better shaving performance. Rinsing the shaving head after each shave under running water is an easy and fast way to keep it clean:

•Switch the shaver on (cordless) and rinse the shaving head under hot running water (e). A natural based soap may also be used provided it contains no particles or abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.

7