Lifescan Diabetes Monitoring System manual ONE Touch Basic Plus Blood Glucose Meter, Button

Page 12

ONE TOUCHBASICPlus

Blood Glucose Meter

Study this diagram and become familiar with all the parts of your ONE TOUCHBASICPlus Meter.

M BUTTON

The ONE TOUCH BASIC Plus Meter automatically stores your test results. Use the M button to recall the information stored in your meter’s memory and to review your meter’s option settings.

DATA PORT

 

Allows you to transfer the

M

information stored in the meter’s

 

memory to a computer to view,

 

analyze, and print.

TEST STRIP HOLDER

The test strip holder holds a ONE TOUCHTest Strip in place when you perform a blood glucose or control solution test. It must be

5

removed to clean the meter.

BATTERY COMPARTMENT (on back) Holds two AAA batteries. The batteries are already installed in your meter.

DISPLAY

The large, easy-to-read display is where you read the simple messages that guide you through testing. Your test results are displayed here.

ON/OFF BUTTON

This button turns the meter on and off.

C

C BUTTON

Use the C button to change the option settings on the ONE TOUCH BASIC Plus Meter.

TEST AREA

The test area is located under the test strip holder. There is a clear, protective coating over the test area that must be kept clean and undamaged for accurate results.

Image 12
Contents Owner’s Booklet Dear ONE Touch TM Basic TM Plus Owner Page Page Table of Contents Using the Meter Memory Solving Problems Precautions and Limitations Infection Control Getting Started Page ONE Touch Basic Plus Blood Glucose Meter ButtonPage ONE Touch Test Strips Important Test Strip Information Before Testing Setting Meter CodePress the On/Off Button Match the Code NumbersChecking the System Code the MeterChecking with the Check Strip When insert code 10 Example Press the On/Off Button. Insert Side 1 of the Check StripStep Appears, Remove the Check Strip from the Test Strip HolderExample Checking with Control Solution Page Important Control Solution Test Information When insert code10 Press On/Off Button. Insert Test StripApply Control Solution Control Solution Result Appears in 45 SecondsControl solution results Detailed Test Procedure Penlet Plus Adjustable Blood SamplerGetting a Drop of Blood Page Cock the Penlet Plus Sampler Wash Your HandsLance Your Finger Remove the LancetAlways use caution when removing Check code and then Remove a test strip Apply Blood Sample Accurate Results in 45 Seconds Special Messages Checking the Amount of Blood on the Test Strip Page Using the Meter Memory Entering the Memory Mode Recalling Test Results Setting Meter Options Entering and Using the Set-Up ModePage Clock Time and Date Setting the Time Beep Prompts Language Time Format Date FormatUnit of Measure Decimal SeparatorExiting the Set-Up Mode Solving Problems Test Procedure MessagesCode Check code Insert Code 1 0 Example Strip wait Apply sampleInsert s i d e Alternating with Error Messages Battry Clean test area Remove stripError 1 retest Error 2 retestMessage Problem What to do Error3 retest Not enough blood retestT o k D o a RetestMeter requires a Taking Care Your Meter Cleaning the Meter Doing a Daily CheckClean the Test Strip Holder Remove the Test Strip Holder from the MeterClean the Test Area Do not USEReplace the Test Strip Holder Replacing the Batteries To replace the batteries References Specifications Result Range 0-600 mg/dLWarranty Three-Year WarrantyPage Page IFD/OB/OTBP