Lifescan Diabetes Monitoring System manual Clock Time and Date

Page 46

Clock (Time and Date)

The ONE TOUCH™ BASIC™ Plus Meter has an internal clock that will record the time and date of each test you perform. Your meter has been set to automatically record tests both when the Clock option is set to and when it is set to .

You may need to change the time setting in your meter to have the correct time and date appear with your test result. You will also need to reset the time whenever there is a change to or from daylight saving time.

Note: The accuracy of your test results will not be affected if you do not set the Clock option to the correct time and date or if you choose not to display the time and date.

Once the Clock option is set to , you are ready to set the time.

Note: The first time you enter the set-up mode, the Clock option will be preset to . To set the Clock option to , see page 37, “Entering and Using the Set-Up Mode.”

39

Image 46

Contents Owner’s Booklet Dear ONE Touch TM Basic TM Plus Owner Page Page Table of Contents Using the Meter Memory Solving Problems Precautions and Limitations Infection Control Getting Started Page ONE Touch Basic Plus Blood Glucose Meter ButtonPage ONE Touch Test Strips Important Test Strip Information Before Testing Setting Meter CodePress the On/Off Button Match the Code NumbersChecking the System Code the MeterChecking with the Check Strip Step When insert code 10 ExamplePress the On/Off Button. Insert Side 1 of the Check Strip Appears, Remove the Check Strip from the Test Strip HolderExample Checking with Control Solution Page Important Control Solution Test Information When insert code10 Press On/Off Button. Insert Test StripApply Control Solution Control Solution Result Appears in 45 SecondsControl solution results Detailed Test Procedure Penlet Plus Adjustable Blood SamplerGetting a Drop of Blood Page Cock the Penlet Plus Sampler Wash Your HandsLance Your Finger Remove the LancetAlways use caution when removing Check code and then Remove a test strip Apply Blood Sample Accurate Results in 45 Seconds Special Messages Checking the Amount of Blood on the Test Strip Page Using the Meter Memory Entering the Memory Mode Recalling Test Results Setting Meter Options Entering and Using the Set-Up ModePage Clock Time and Date Setting the Time Beep Prompts Language Time Format Date FormatUnit of Measure Decimal SeparatorExiting the Set-Up Mode Test Procedure Messages Solving ProblemsCode Check code Insert Code 1 0 Example Strip wait Apply sampleInsert s i d e Alternating with Error Messages Battry Clean test area Remove stripError 1 retest Error 2 retestMessage Problem What to do Error3 retest Not enough blood retestT o k D o a RetestMeter requires a Taking Care Your Meter Cleaning the Meter Doing a Daily CheckClean the Test Strip Holder Remove the Test Strip Holder from the MeterClean the Test Area Do not USEReplace the Test Strip Holder Replacing the Batteries To replace the batteries References Specifications Result Range 0-600 mg/dLWarranty Three-Year WarrantyPage Page IFD/OB/OTBP