Graham Field Mp7114, MM7114, Mp7174, MM7174, Mp707404 manual Ssembly standard head and foot boards

Page 12

Assembly - standard head and foot boards

1.Assemble two Mounting Tubes (#4) to the Headboard (#1) and two to the Footboard (#2) using eight 1/4-20 x 4mm JCB-B Hex Drive Bolts (#6), going through the pre-drilled holes on the boards and into the eight 1/4-20 x .60” Long Threaded Inserts (#3) (already attached to the boards) as shown. Hand tighten only at this time.

2.Insert the Mounting Tubes into the Main Bed Frame Tubes so that the holes match up as shown. Secure with four 5/16 x 1-1/2” Clevis Pins (#7) and 1-9/16 Hair Pin Clips (#8) (1 each per bed frame tube). The mounting tubes will slide underneath the two 5/16-18 x 1.50” Carriage bolts that were pre-inserted into the Main Frame Rails at the head-end of the bed by the manufacturer.

3.Now tighten all screws with a phillips screwdriver. Be careful not to overtighten.

Item #

Quantity

Part #

Description

 

 

 

 

1

1

-

Headboard*

 

 

 

 

2

1

-

Footboard*

 

 

 

 

3

8

100-7025-004

1/4-20 UNC x .60” Long Threaded Insert

(pre-inserted into footboard and headboard)

 

 

 

 

 

 

 

 

Headboard & Footboard Mounting Kit (999-0775-000) includes the following parts:

 

 

 

 

4

4

999-0746-035G

Mounting Tubes

 

 

 

 

5

4

100-4700-015

1” x 1” Square Tube End Cap (pre-inserted in tubes)

 

 

 

 

6

8

100-5425-094

1/4-20 x 4mm JCB-B Hex Drive Bolt

 

 

 

 

7

4

100-7931-007

Clevis Pin - 5/16 x 1-1/2” w/cross hole

 

 

 

 

8

4

100-2001-006

1-9/16 Hair Pin Clip

 

 

 

 

not shown

1

100-9900-060

M4 4mm Hex Allen Wrench

 

 

 

 

 

Hardware Pre-inserted into Main Frame Rails to Hold Mounting Tubes

 

 

 

 

9

2

100-5231-003

5/16-18 x 1.50” Carriage Bolt

 

 

 

 

10

2

100-6731-006

5/16-18 Thin Nylon Lock Nut

 

 

 

 

*There are a number of stylish options for Matrix II Headboards and Footboards including Oak, Walnut, and Mahogany finishes. Please consult your catalog, our website (www.graham-field.com), or contact one of our Sales Representatives for options. Please note that headboards and footboards come as a kit and are not interchangeable.

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual

p9

Image 12
Contents Page Important notIce Able of Contents Afety & Warning Information please read before operation Ntrapment compliance information ED features & Specifications FeaturesOsitioning Specifications Quick ReferencePeration of Standard PENDANT/HAND Controller Easy Patient ControlsPeration of Optional STAFF/NURSE Control HEAD- & Footboards Standard Headboard and Footboard Boring Diagram Ssembly standard head and foot boards Standard Headboard and Footboard Assembly Staff CONTrOL ASSEMBLy KIT ZL788053 INCLuDES Ssembly Optional foot board Embedded Staff ControlWALLSAVERS, Mattress Retainers Edema Ratchets Ssembly standard wallsaver with optional trapeze positioning Ssembly standard corner mattress retainers RequiredPeration of Optional Edema Foot Ratchet Foot-end rAtcHet FuLL-doWn posItIon FuLL-up posItIonAccessory Assembly Ccessory Assembly Head & Foot Half Rails Head-End Half Rail KIT ZA78400FOOT-End Half Rail KIT ZA78500 Ccessory Assembly Foot Rail Bracket for Half Rails For 2 Half Rail Foot Brackets Order Hardware Bag/KitCcessory Assembly Foot-END Assist BAR OptIon 1Ccessory Assembly HEAD-END Assist BAR Ccessory Assembly standard 4 extension pan Kit Assembly INSTRucTIONSCcessory Assembly 42 wide deck order Kit# ZA811000 Item # Qty DescriptionCcessory Assembly 4 wide deck extension pan KIT Standard KIT #ZA82100 Includes Items 1Ccessory Assembly Trapeze support Assembly Kit#Parts & Hardware Ssembly of HEAD, KNEE, & Foot Decks to Main Frame Ssembly of Main Frame to U-LEVERS and Drag Link Ssembly of U-LEVERS to STD. Caster Carriage 999-0807-955G Ssembly of U-LEVERS to Locking Caster Carriage 999-0807-958G Electronics Ssembly of Head ACTUATOR/MOTOR to Head Deck & Frame Ssembly of Foot ACTUATOR/MOTOR to Knee Deck & Frame Knee DeckSsembly of HI/LO ACTUATOR/MOTOR to Drag Link & U-LEVER Cabling Ontrol BOX Cabling Connections & cables SInGLe controL BoXEad motor Cabling 999-0778-204 Viewed from Bottom ILO motor Cabling 999-0775-202 viewed from Bottom Oot motor Cabling 999-0775-201 Viewed from Bottom Endant Cabling 999-0775-305 & 999-0779-200 from Bottom Power cORD ROuTING with cABLE Ties Ower Cord Cabling 999-0775-208 Viewed from BottomLectronic Troubleshooting Event Possible solutionsEcommended Maintenance & Inspection Schedules Mechanical Inspection of assemblies 6 monthsOtes