Graham Field MM7074, Mp7074, Mp7114, MM7114, Mp7174 manual Ositioning Specifications, Quick Reference

Page 7

Positioning Specifications

The Matrix II Bed Series has infinite positions that serve to help the patient be more comfortable and gives the practitioner easy access during procedures, transfers, etc. The correct placement of the bed is essential for the patient’s safety.

The bed should always be set to its lowest position when the patient is left unattended. The head and knee functions allow the resident/patient to raise their head or legs.

The recommended maximum distance for the head function is 70˚. In the event of a power outage, it is preferred that the knee and back sections be lowered using an emergency battery pack. If unavailable, the sections can be set into the flat position by easily removing the actuator mounting pins.

Floor

25.00”

8.90”

QUICK REFERENCE:

MAXIMUM (High Position) Bed height from floor to sleep deck top = 25.00”

MINIMUM (Low Position) Bed height from floor to sleep deck top = 8.90”

DISTANCE TO WALL (High) Headboard mounting tube to end of std. wallsaver = 1.75”

DISTANCE TO WALL (Low) Headboard mounting tube to end of std. wallsaver = 1.50”

MAXIMUM (Head Angle) Head deck to sleep surface = 70º

MINIMUM (Knee Angle)

Knee deck to sleep surface = 30º

MAXIMUM (Knee/Foot Angle) Knee deck to foot deck = 45º

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual

p4

Image 7
Contents Page Important notIce Able of Contents Afety & Warning Information please read before operation Ntrapment compliance information Features ED features & SpecificationsQuick Reference Ositioning SpecificationsEasy Patient Controls Peration of Standard PENDANT/HAND ControllerPeration of Optional STAFF/NURSE Control HEAD- & Footboards Standard Headboard and Footboard Boring Diagram Ssembly standard head and foot boards Standard Headboard and Footboard Assembly Ssembly Optional foot board Embedded Staff Control Staff CONTrOL ASSEMBLy KIT ZL788053 INCLuDESWALLSAVERS, Mattress Retainers Edema Ratchets Ssembly standard wallsaver with optional trapeze positioning Required Ssembly standard corner mattress retainersFoot-end rAtcHet FuLL-doWn posItIon FuLL-up posItIon Peration of Optional Edema Foot RatchetAccessory Assembly Head-End Half Rail KIT ZA78400 Ccessory Assembly Head & Foot Half RailsFOOT-End Half Rail KIT ZA78500 For 2 Half Rail Foot Brackets Order Hardware Bag/Kit Ccessory Assembly Foot Rail Bracket for Half RailsOptIon 1 Ccessory Assembly Foot-END Assist BARCcessory Assembly HEAD-END Assist BAR Assembly INSTRucTIONS Ccessory Assembly standard 4 extension pan KitItem # Qty Description Ccessory Assembly 42 wide deck order Kit# ZA811000Standard KIT #ZA82100 Includes Items 1 Ccessory Assembly 4 wide deck extension pan KITAssembly Kit# Ccessory Assembly Trapeze supportParts & Hardware Ssembly of HEAD, KNEE, & Foot Decks to Main Frame Ssembly of Main Frame to U-LEVERS and Drag Link Ssembly of U-LEVERS to STD. Caster Carriage 999-0807-955G Ssembly of U-LEVERS to Locking Caster Carriage 999-0807-958G Electronics Ssembly of Head ACTUATOR/MOTOR to Head Deck & Frame Knee Deck Ssembly of Foot ACTUATOR/MOTOR to Knee Deck & FrameSsembly of HI/LO ACTUATOR/MOTOR to Drag Link & U-LEVER Cabling SInGLe controL BoX Ontrol BOX Cabling Connections & cablesEad motor Cabling 999-0778-204 Viewed from Bottom ILO motor Cabling 999-0775-202 viewed from Bottom Oot motor Cabling 999-0775-201 Viewed from Bottom Endant Cabling 999-0775-305 & 999-0779-200 from Bottom Ower Cord Cabling 999-0775-208 Viewed from Bottom Power cORD ROuTING with cABLE TiesEvent Possible solutions Lectronic TroubleshootingMechanical Inspection of assemblies 6 months Ecommended Maintenance & Inspection SchedulesOtes