Graham Field MM7014, Mp7074, Mp7114, MM7114, Mp7174 Ccessory Assembly Foot-END Assist BAR, OptIon 1

Page 23

A ccessory Assembly - Foot-END ASSIST BAR

NOTE: Pre-assembly of the Rail Bracket to the foot section is required

optIon 1

before the Foot-End Assist Bar can be attached. Please see page 19.

 

1.With the Assist Bar (#1) bracket facing inward toward the bed as shown, align the two holes on the bracket with the first and third holes (from the head-end of the bed) of the pre-welded head deck bracket (#2)

2.For the quick release option, insert the Clevis Pin end of the two Lanyard assemblies (3a) from the outside into the assist bar bracket holes. Insert the hair pins on the opposite end of the lanyard assemblies (3b) into the holes of the clevis pins.

3.For a fixed attachment option, insert two cap screws (#4) from the outside into the assist bar bracket holes. Secure the screws by attaching two Thin Nylon Lock Nuts (#5).Tighten with two 13/16 wrenches.

Order Kit #ZA80350 - Includes Bracket and Hardware

Item #

Qty.

Part #

Description

 

 

 

 

1

1

999-0803-902G

Assist Bar - Foot End

 

 

 

 

2

1

999-0786-995

Attach Foot Rail Bracket

(included)

(see page 19)

 

 

 

 

 

 

not

2

100-4710-003

1.00” Dia. End Cap

shown

 

 

 

Option 1: Quick Release (in Hdw Bag 999-0803-905)

 

 

 

 

3

2

999-0784-100

Quick Release

Lanyard Assembly

 

 

 

 

 

 

 

Option 2: Fixed Attachment (in Hdw Bag 999-0803-905)

 

 

 

 

4

2

100-5463-004

5/8-11 x 4.50”

Hex Head Cap Screw

 

 

 

 

 

 

 

5

2

100-6763-001

5/8-11 Thin Nylon

Lock Nut

 

 

 

 

 

 

 

to safely remove Hair pin clip grasp on circular end and pull.

 

 

 

 

close-up of Hair

 

 

 

pin clip (#8)

 

 

 

inserted into

 

 

 

hole in clevis

1

optIon 2

pin (#7)

 

 

 

 

 

 

4

5

2

WARNING: The mattress support platform should always be placed in the flat position when not attended.

! When assessing the Risk for Entrapment, you need to consider your bed, mattress, head- and footboards, half rails, assist bars, and other accessories as an entire system. All bed systems are evaluated for compliance to the FDA/CDRH “Hospital Bed System Dimensional and Assessment Guidance to Reduce Entrapment” guidelines.

A resident/patient’s condition could lead to resident/patient entrapment. It is extremely important to review the resident/patient’s physical and mental condition, and initiate an appropriate individual care plan to address any entrapment risks.

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual

p20

Image 23
Contents Page Important notIce Able of Contents Afety & Warning Information please read before operation Ntrapment compliance information Features ED features & SpecificationsQuick Reference Ositioning SpecificationsEasy Patient Controls Peration of Standard PENDANT/HAND ControllerPeration of Optional STAFF/NURSE Control HEAD- & Footboards Standard Headboard and Footboard Boring Diagram Ssembly standard head and foot boards Standard Headboard and Footboard Assembly Ssembly Optional foot board Embedded Staff Control Staff CONTrOL ASSEMBLy KIT ZL788053 INCLuDESWALLSAVERS, Mattress Retainers Edema Ratchets Ssembly standard wallsaver with optional trapeze positioning Required Ssembly standard corner mattress retainersFoot-end rAtcHet FuLL-doWn posItIon FuLL-up posItIon Peration of Optional Edema Foot RatchetAccessory Assembly Head-End Half Rail KIT ZA78400 Ccessory Assembly Head & Foot Half RailsFOOT-End Half Rail KIT ZA78500 For 2 Half Rail Foot Brackets Order Hardware Bag/Kit Ccessory Assembly Foot Rail Bracket for Half RailsOptIon 1 Ccessory Assembly Foot-END Assist BARCcessory Assembly HEAD-END Assist BAR Assembly INSTRucTIONS Ccessory Assembly standard 4 extension pan KitItem # Qty Description Ccessory Assembly 42 wide deck order Kit# ZA811000Standard KIT #ZA82100 Includes Items 1 Ccessory Assembly 4 wide deck extension pan KITAssembly Kit# Ccessory Assembly Trapeze supportParts & Hardware Ssembly of HEAD, KNEE, & Foot Decks to Main Frame Ssembly of Main Frame to U-LEVERS and Drag Link Ssembly of U-LEVERS to STD. Caster Carriage 999-0807-955G Ssembly of U-LEVERS to Locking Caster Carriage 999-0807-958G Electronics Ssembly of Head ACTUATOR/MOTOR to Head Deck & Frame Knee Deck Ssembly of Foot ACTUATOR/MOTOR to Knee Deck & FrameSsembly of HI/LO ACTUATOR/MOTOR to Drag Link & U-LEVER Cabling SInGLe controL BoX Ontrol BOX Cabling Connections & cablesEad motor Cabling 999-0778-204 Viewed from Bottom ILO motor Cabling 999-0775-202 viewed from Bottom Oot motor Cabling 999-0775-201 Viewed from Bottom Endant Cabling 999-0775-305 & 999-0779-200 from Bottom Ower Cord Cabling 999-0775-208 Viewed from Bottom Power cORD ROuTING with cABLE TiesEvent Possible solutions Lectronic TroubleshootingMechanical Inspection of assemblies 6 months Ecommended Maintenance & Inspection SchedulesOtes