P
Right Head
endant CABLING (999-0775-305 & 999-0779-200) - FROM BOTTOM
PENDANT cABLE AND 30” ExTENSION cORD ROuTING WITH cABLE TIES
the pendant cable (attached to pendant
200)runs from the HB port in the control box, underneath the box, gets cable tied to the power cable, runs around the vertical bracket, continues along the left frame rail and plugs into the pendant cable. secure both cables with ties to frame and brackets as shown.
HeAd end
End
30” eXtensIon cABLe
cABLe tIe 30” eXtensIon cABLe
cABLe tIe pendAnt
&eXtensIon cABLes
&poWer cord Ground WIre toGetHer Here
Foot end
Left Head End - Viewed From Bottom
cABLe tIe pendAnt cABLe, poWer cord, HI/Lo cABLe, And Foot Motor cABLe, Around FrAMe rAIL
cABLe tIe pendAnt cABLe (neAr coIL) to HoLe In seAt pAn FrAMe
cABLe tIe pendAnt cABLe, poWer cord, HI/Lo cABLe, And Foot Motor cABLe, Around HeAd Motor cAsInG
cABLe tIe pendAnt cABLe, eXtensIon cABLe, poWer cord, And HeAd Motor cABLe toGetHer Here
cABLe tIe pendAnt & eXtensIon cABLes & Ground WIre to HoLe In MAIn FrAMe rAIL
run pendAnt & eXtensIon cABLes tHrouGH FrAMe rAIL BrAcket And cABLe to tHe MAIn FrAMe rAIL ABove tHe BrAcket
Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual | p40 |