Graham Field Mp7174, Mp7074, Mp7114, MM7114, MM7174 Ccessory Assembly 4 wide deck extension pan KIT

Accessory Assembly - 4” wide deck extension pan KIT

PIcTuRED:

ASSEMBLY INSTRucTIONS

1.Raise the bed to a comfortable working height and elevate the knee deck to its highest position. Now unplug the power cord.

2.Separate the footboard assembly from the main frame by removing the existing clevis pins and hair pin clips. Put aside hardware. You will reuse the clevis pins and hair pin clips in step 4 below.

3.Attach the wide 4” extension pan (#1) to the foot deck by inserting the two 1/4-20 x .75” Carriage Bolts (#2) from your hardware bag through the top designated holes and, from the bottom, secure the pan tightly to the deck with two Spring Washers (#3) and two Pan Knobs (#4).

4.Now reinstall the footboard assembly by sliding the mounting tubes into the frame, lining up the holes as shown (Note: The last hole in the tube will

now be one hole closer to the end of the main frame). Re-insert the 5/16 x 1.75” clevis pins (#5) from the outside in and secure with 1-9/16 hair pin clips (#6).

5.Replug the power cord and verify that all bed functions work properly and all parts have adequate clearance.

STANDARD KIT: #ZA82100 (Includes Items 1 - 5)

Hardware Bag 999-0821-995)

Item #	Qty.	Part #	Description
1	1	999-0821-001G	4” Wide Kit Extension Pan
2	2	100-5225-009	1/4-20 x .75” Carriage Bolt
3	2	100-8525-001	1/4 Spring Lock Washer
4	2	999-0810-009	Black Pan Knob
5	2	100-7931-006	5/16 x 1.75” Clevis Pin w/Hole
6	2	100-2001-006	1-9/16 Hair Pin Clip
			(Use existing)

Matrix II Foot end with standard Leveler straps, Wide Footboard, and Wide deck 4” extension pan.

note: the extension pan for the wide deck is actually bigger (both in width and length) than the standard extension pan but still only extends the bed deck four inches.

Reuse existing Hair Pin Clips

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual p24