Graham Field Mp7114, Mp7074 Ccessory Assembly standard 4 extension pan Kit, Assembly INSTRucTIONS

Accessory Assembly - standard 4” extension pan Kit

ASSEMBLY INSTRucTIONS

1.Raise the bed to a comfortable working height and elevate the knee deck to its highest position. Now unplug the power cord.

PIcTuRED:

2.Separate the footboard assembly from the main frame by removing the existing clevis pins and hair pin clips. Put aside hardware. You will reuse the clevis pins and hair pin clips in step 4 below.

3.Attach the standard 4” extension pan (#1) to the foot deck using two 5/16-18 x .75” carriage bolts (#2) through the top designated holes and secure tightly with two wing nuts (#3) from the bottom.

4.Now reinstall the footboard assembly by sliding the mounting tubes into the frame, lining up the holes as shown (Note: The last hole in the tube will now

be one hole closer to the end of the main frame). Re-insert the 5/16 x 1.75” clevis pins (#4) from the outside in and secure with 1-9/16 hair pin clips (#5).

5.Replug the power cord and verify that all bed functions work properly and all parts have adequate clearance.

STANDARD KIT: #ZA71900 (Includes Items 1 - 4)

Hardware Bag 999-0719-995)

Item #	Qty.	Part #	Description
1	1	999-0719-001G	Standard 4” Extension Pan
2	2	100-5231-001	5/16-18 x .75” Carriage Bolt
3	2	100-6931-001	5/16-18 Wing Nut
4	2	100-7931-006	5/16 x 1.75” Clevis Pin w/Hole
5	2	100-2001-006	1-9/16 Hair Pin Clip
			(Use existing)

Matrix II Foot end with standard- Footboard, Leveler straps, and 4” extension pan.

Reuse existing Hair Pin Clips

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual p22