Graham Field MM7114 Ccessory Assembly 42 wide deck order Kit# ZA811000, Item # Qty Description

Page 26

Accessory Assembly - 42” wide deck (order Kit# ZA811000)

Foot-end Half rail

!wide head- & footboards and assist devices when purchasing any 42” expansion kit. A variety of complete kits are available.WArnInG:to reduce the risk of entrapment it is highly recommended to include both

ASSEMBLY INSTRucTIONS

1.Align the right-hand foot assembly above the foot and knee decks with the angle hooks facing downward and toward the foot end. The right knee extension (#4) hook should be positioned just above the knee deck (toward the head end). Place the assembly flat on the two decks making sure they are flush with the decks’ sides. Slide the foot extension’s hooks onto the foot-end decks. Follow the same procedure for the left side.

Wide

Footboard

example of right-side expansion pans with Foot-end Assist device & Wide Footboard

Packaged in four assemblies for easy assembly (kit includes all mounting hardware)

5/16-18 Machine screws self-Wrenching nuts

Right Side Foot Assembly Right Head Foot Assembly

Left Side Foot Assembly Left Side Head Assembly

Wide Kit Mattress Retainers

the Matrix II expansion kit uses special bolt-on mattress retainers (999-0810-008) order kIt# 999-0810-000 for two retainers.

2.The right-hand head assembly should be aligned above the head-deck as shown, with the angle hook positioned downward and just above the head deck. Place the assembly flat on the head deck and seat pan making sure they are flush with the deck’s side. Slide the extension assembly toward the foot end to lock the extension’s hooks onto the head deck and pan seat. Make sure that the right-hand seat pan extension (#3) is on the

outside of the right-hand knee extension (#4). Follow the same procedure for the left side.

3.Locate the two 5/16-18 x .375” Hex Washer Head Machine Screws (#9)

and the two Self-Wrenching Nuts (#8) in your hardware bag. From the out- side, insert a self-wrenching nut so that the square part of the nut fits into the square hole of the head assembly mounting arm and the end extends through the hole in the foot mounting arm. From the inside, screw in a machine screw and

tighten using a 1/2” wrench. Follow the same procedure for the opposite side.

4.Locate the eight 5/16 x 3.50” Clevis Pins (#10) and eight 1-9/16 Hair Pin Clips (#11) in your hardware bag. From the outside, insert the clevis pins through the pre-drilled holes in the sides of the right- and left-hand head and foot expansion

pans. From the inside, insert the hair pin clips into the exposed holes on the clevis pins to secure the pins to all decks.

80” WIDE KIT WITHOuT BOARDS: #ZA811000 (Includes Items 1 - 11)

76” WIDE KIT WITHOuT BOARDS: #ZA846000 (Includes Items 1 - 11)

Item #

Qty.

Part #

Description

 

 

 

 

1

1

999-0811-921G

Left-Hand Head Extension Weldment

 

 

 

 

2

1

999-0811-922G

Right-Hand Head Extension Weldment

 

 

 

 

3

2

999-0811-004G & 005G

Left- & Right-Hand Seat Pan Extension

 

 

 

 

4

1

999-0810-012G

Right-Hand Knee Extension

 

 

 

 

5

1

999-0810-002G

Left-Hand Knee Extension

 

 

 

 

6

1

999-0811-932G

80” Right-Hand Foot Extension Weldment

 

 

 

 

7

1

999-0811-931G

80” Left-Hand Foot Extension Weldment

 

 

 

 

Not Shown

1

999-0846-932G

Opt. 76” Right-Hand Foot Extension Weldment

Not Shown

1

999-0846-931G

Opt. 76” Left-Hand Foot Extension Weldment

Both kits Include Hardware Box: 999-0811-950 which has the following . . .

 

 

 

 

8

6

999-0032-010

Self-Wrenching Nut (4 pre-assembled on decks)

 

 

 

 

9

6

100-5431-002

5/16-18 x .375” HWHMS (4 pre-assembled on decks)

 

 

 

 

10

8

100-7931-008

5/16 x 3.50” Clevis Pin w/Hole

 

 

 

 

11

8

100-2001-006

1-9/16 Hair Pin Clip

 

 

 

 

Basic American Medical products, a division of GF Health products, Inc. • Matrix II • rev d Manual

p23

Image 26
Contents Page Important notIce Able of Contents Afety & Warning Information please read before operation Ntrapment compliance information ED features & Specifications FeaturesOsitioning Specifications Quick ReferencePeration of Standard PENDANT/HAND Controller Easy Patient ControlsPeration of Optional STAFF/NURSE Control HEAD- & Footboards Standard Headboard and Footboard Boring Diagram Ssembly standard head and foot boards Standard Headboard and Footboard Assembly Staff CONTrOL ASSEMBLy KIT ZL788053 INCLuDES Ssembly Optional foot board Embedded Staff ControlWALLSAVERS, Mattress Retainers Edema Ratchets Ssembly standard wallsaver with optional trapeze positioning Ssembly standard corner mattress retainers RequiredPeration of Optional Edema Foot Ratchet Foot-end rAtcHet FuLL-doWn posItIon FuLL-up posItIonAccessory Assembly Ccessory Assembly Head & Foot Half Rails Head-End Half Rail KIT ZA78400FOOT-End Half Rail KIT ZA78500 Ccessory Assembly Foot Rail Bracket for Half Rails For 2 Half Rail Foot Brackets Order Hardware Bag/KitCcessory Assembly Foot-END Assist BAR OptIon 1Ccessory Assembly HEAD-END Assist BAR Ccessory Assembly standard 4 extension pan Kit Assembly INSTRucTIONSCcessory Assembly 42 wide deck order Kit# ZA811000 Item # Qty DescriptionCcessory Assembly 4 wide deck extension pan KIT Standard KIT #ZA82100 Includes Items 1Ccessory Assembly Trapeze support Assembly Kit#Parts & Hardware Ssembly of HEAD, KNEE, & Foot Decks to Main Frame Ssembly of Main Frame to U-LEVERS and Drag Link Ssembly of U-LEVERS to STD. Caster Carriage 999-0807-955G Ssembly of U-LEVERS to Locking Caster Carriage 999-0807-958G Electronics Ssembly of Head ACTUATOR/MOTOR to Head Deck & Frame Ssembly of Foot ACTUATOR/MOTOR to Knee Deck & Frame Knee DeckSsembly of HI/LO ACTUATOR/MOTOR to Drag Link & U-LEVER Cabling Ontrol BOX Cabling Connections & cables SInGLe controL BoXEad motor Cabling 999-0778-204 Viewed from Bottom ILO motor Cabling 999-0775-202 viewed from Bottom Oot motor Cabling 999-0775-201 Viewed from Bottom Endant Cabling 999-0775-305 & 999-0779-200 from Bottom Power cORD ROuTING with cABLE Ties Ower Cord Cabling 999-0775-208 Viewed from BottomLectronic Troubleshooting Event Possible solutionsEcommended Maintenance & Inspection Schedules Mechanical Inspection of assemblies 6 monthsOtes