Third Edition • Second Printing | Operator's Manual |
|
|
|
|
Pre-operation Inspection
oBe sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
oBe sure that all decals are legible and in place. See Decals section.
oCheck for hydraulic oil leaks and proper oil level. See Maintenance section.
oCheck for battery fluid leaks and proper fluid level. Add distilled water if needed. See Maintenance section.
Check the following components or areas for damage, improperly installed or missing parts and unauthorized modifications:
oElectrical components, wiring and electrical cables
oHydraulic power unit, tank, hoses, fittings, cylinders and manifolds
oBattery pack and connections
oDrive motors
oTires and wheels
oLimit switches and alarms
oNuts, bolts and other fasteners
oPlatform entry
oSequencing cables and pulleys
oPlatform extension (if equipped)
oWork trays and bike racks (if equipped)
oMast columns and counterweight
oPlatform controls
oBrake release components
PRE-OPERATION INSPECTION
Check the entire machine for:
oCracks in welds or structural components
oDents or damage to the machine
oBe sure that all structural and other critical components are present and all associated fasteners and pins are in place and properly tightened.
Part No. 97779 | 13 |