Genie GR-12 manual Maximum capacity GR-20 Standard platform, Maximum slope rating, stowed position

Page 5

Third Edition • Second Printing

Operator's Manual

 

 

 

 

Maximum capacity - GR-20

Standard platform

159 kg

 

 

Maximum occupants

1

 

 

Stock Picker platform

159 kg

 

 

Adjustable work station tray

68 kg

 

 

Bike rack (option) (each)

20 kg

 

 

Maximum occupants

1

 

 

AWP and fiberglass platform

159 kg

 

 

Maximum occupants

1

 

 

SAFETY RULES

Do not raise the platform unless the machine is on a firm, level surface.

Do not depend on the tilt alarm as a level indicator. The tilt alarm sounds only when the machine is on a slope.

If the tilt alarm sounds:

Lower the platform immediately. Move the machine to a firm, level surface. If the tilt alarm sounds when the platform is raised, use extreme caution to lower the platform.

Do not alter or disable the limit switches.

Do not drive over 0.8 km/h with the platform raised.

Use extreme care and slow speeds while driving the machine in the stowed position across uneven terrain, debris, unstable or slippery surfaces and near holes and drop-offs.

Do not drive the machine on a slope that exceeds the slope and side slope rating of the machine.Slope rating applies to machines in the stowed position.

Maximum slope rating, stowed position

30%

(17°)

 

 

 

Maximum side slope rating,

 

 

stowed position

30%

(17°)

 

 

 

Note: Slope rating is subject to ground conditions and adequate traction.

Part No. 97779

GR-12GR-15GR-20

3

Image 5
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesMaximum capacity GR-12 and GR-15 Standard platform Electrocution HazardsStock Picker platform AWP and fiberglass platformMaximum side slope rating Stowed position Maximum capacity GR-20 Standard platformMaximum slope rating, stowed position Maximum allowable manual force Collision Hazards Fall HazardsComponent Damage Hazard Crushing HazardExplosion and Fire Hazard Damaged Machine HazardsExplosion Hazards Battery Safety Burn HazardsTip-over Hazard Lifting HazardDecal Legend Page Platform Controls ControlsGround Control Panel Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionMaintenance Symbols Legend MaintenanceHydraulic oil specifications Observe and ObeyCheck the Batteries Scheduled MaintenanceFunction Tests At the Platform Controls At the Ground ControlsTest the Tilt Sensor Operation Test the SteeringTest Drive and Braking Test the Pothole Guards Test Limited Drive SpeedWorkplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsAuxiliary Lowering Emergency StopOperation From Ground Operation From PlatformDriving on a slope To Reduce Drive SpeedBattery Level Indicator Error Indicator displayTo Extend and Retract Platform if equipped Operation From Ground with ControllerMaintenance free batteries Battery and Charger Instructions Observe and ObeyTo Charge Batteries Standard BatteriesBrake Release Operation Transport and Lifting InstructionsSecuring the Chassis Loading the Machine With a CraneSecuring to Truck or Trailer for Transit Description Quantity DecalsDecals Inspection for Decals with Symbols Stock Picker Platform Decals GR-12 SpecificationsDrive speeds Floor loading informationGR-15 SpecificationsGR-20 Platform dimensions, all models length x width Genie Scandinavia