Operator's Manual | Third Edition • Second Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Emergency Stop
Push in the red Emergency Stop button to the off position at the ground or platform controls to stop all machine functions.
Repair any function that operates when either red Emergency Stop button is pushed in.
Auxiliary Lowering
1 Pull the auxiliary lowering knob.
Operation From Ground
1Turn the key switch to ground control.
2Pull out both ground and platform red Emergency Stop buttons to the on position.
3Be sure the battery pack is connected before operating the machine.
To Position Platform
1Move the up/down toggle switch according to the markings on the control panel.
Drive and steer functions are not available from the ground controls.
Operation From Platform
1Turn the key switch to platform control.
2Pull out the ground and platform red Emergency Stop buttons to the on position.
3Be sure the battery pack is connected before operating the machine.
To Position Platform
1 Press the lift function select button.
2Press and hold the function enable switch on the control handle.
3Move the control handle according to the markings on the control panel.
To Steer
1 Press the drive function select button.
2Press and hold the function enable switch on the control handle.
3Turn the steer wheels with the thumb rocker switch located on the top of the control handle.
To Drive
1Press the drive function select button.
2Press and hold the function enable switch on the control handle.
3Increase speed: Slowly move the control handle off center.
Decrease speed: Slowly move the control handle toward center.
Stop: Return the control handle to center or release the function enable switch.
Use the
Machine travel speed is restricted when the platform is raised.
22 | Part No. 97779 |