Genie GR-20, GR-15, GR-12 manual Maintenance, Observe and Obey, Check the Hydraulic Oil Level

Page 16

Operator's Manual	Third Edition • Second Printing

Maintenance

Observe and Obey:

Only routine maintenance items specified in this manual shall be performed by the operator.

Scheduled maintenance inspections shall be completed by qualified service technicians, according to the manufacturer's specifications and the requirements specified in the responsibilities manual.

Maintenance Symbols Legend

The following symbols have been used in this manual to help communicate the intent of the instructions. When one or more of the symbols appear at the beginning of a maintenance procedure, it conveys the meaning below.

Indicates that tools will be required to perform this procedure.

Indicates that new parts will be required to perform this procedure.

Check the Hydraulic Oil Level

Maintaining the hydraulic oil at the proper level is essential to safe machine operation. Improper hydraulic oil levels can damage hydraulic components. Daily checks allow the inspector to identify changes in oil level that might indicate the presence of hydraulic system problems.

Perform this procedure with the platform in the stowed position.

1Visually inspect the hydraulic oil level through the indicator at the back of the machine.

Result: The hydraulic oil level should be visible.

2 Add oil if necessary. Do not overfill.

Hydraulic oil specifications

Hydraulic oil type	Chevron Rykon
	Premium MV equivalent

14

GR-12 • GR-15 • GR-20

Part No. 97779

Image 16

Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Maximum capacity GR-12 and GR-15 Standard platformStock Picker platform AWP and fiberglass platformMaximum slope rating, stowed position Maximum capacity GR-20 Standard platformMaximum side slope rating Stowed position Maximum allowable manual force Fall Hazards Collision HazardsCrushing Hazard Component Damage HazardExplosion and Fire Hazard Damaged Machine HazardsBattery Safety Burn Hazards Explosion HazardsTip-over Hazard Lifting HazardDecal Legend Page Controls Platform Controls Ground Control Panel Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendHydraulic oil specifications Observe and ObeyScheduled Maintenance Check the BatteriesFunction Tests At the Ground Controls At the Platform ControlsTest Drive and Braking Test the SteeringTest the Tilt Sensor Operation Test Limited Drive Speed Test the Pothole GuardsWorkplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedEmergency Stop Auxiliary LoweringOperation From Ground Operation From PlatformTo Reduce Drive Speed Driving on a slopeError Indicator display Battery Level IndicatorTo Extend and Retract Platform if equipped Operation From Ground with ControllerBattery and Charger Instructions Observe and Obey Maintenance free batteriesTo Charge Batteries Standard BatteriesTransport and Lifting Instructions Brake Release OperationSecuring to Truck or Trailer for Transit Loading the Machine With a CraneSecuring the Chassis Decals Description QuantityDecals Inspection for Decals with Symbols Stock Picker Platform Decals Specifications GR-12Drive speeds Floor loading informationSpecifications GR-15GR-20 Platform dimensions, all models length x width Genie Scandinavia