Genie GR-12, GR-15, GR-20 manual Contents, Contact us

Page 2

Operator's Manual

Third Edition • Second Printing

 

 

 

 

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries.

Contents

 

 

Page

Safety Rules

1

Legend

9

Controls

10

Pre-operation Inspection

12

Maintenance

14

Function Tests

16

Workplace Inspection

20

Operating Instructions

21

Transport and Lifting Instructions

26

Decals

28

Specifications

32

Contact us:

Internet: http://www.genielift.com

e-mail: techpub@genieind.com

Copyright © 2000 by Genie Industries

First Edition:

Sixth Printing, October 2002

Second Edition:

First Printing, August 2004

Third Edition:

Second Printing, May 2005

"Genie" is a registered trademark of

Genie Industries in the U.S.A. and many other countries. "Runabout" and "GR" are trademarks of Genie Industries.

Printed on recycled paper

Printed in U.S.A.

2

GR-12GR-15GR-20

Part No. 97779

Image 2
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessStock Picker platform Electrocution HazardsMaximum capacity GR-12 and GR-15 Standard platform AWP and fiberglass platformMaximum side slope rating Stowed position Maximum capacity GR-20 Standard platformMaximum slope rating, stowed position Maximum allowable manual force Fall Hazards Collision HazardsExplosion and Fire Hazard Crushing HazardComponent Damage Hazard Damaged Machine HazardsTip-over Hazard Battery Safety Burn HazardsExplosion Hazards Lifting HazardDecal Legend Page Controls Platform ControlsGround Control Panel Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionHydraulic oil specifications MaintenanceMaintenance Symbols Legend Observe and ObeyScheduled Maintenance Check the BatteriesFunction Tests At the Ground Controls At the Platform ControlsTest the Tilt Sensor Operation Test the SteeringTest Drive and Braking Test Limited Drive Speed Test the Pothole GuardsWorkplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedOperation From Ground Emergency StopAuxiliary Lowering Operation From PlatformTo Reduce Drive Speed Driving on a slopeTo Extend and Retract Platform if equipped Error Indicator displayBattery Level Indicator Operation From Ground with ControllerTo Charge Batteries Battery and Charger Instructions Observe and ObeyMaintenance free batteries Standard BatteriesTransport and Lifting Instructions Brake Release OperationSecuring the Chassis Loading the Machine With a CraneSecuring to Truck or Trailer for Transit Decals Description QuantityDecals Inspection for Decals with Symbols Stock Picker Platform Decals Drive speeds SpecificationsGR-12 Floor loading informationSpecifications GR-15GR-20 Platform dimensions, all models length x width Genie Scandinavia