Toshiba IVP8 manual Grand Tour, Hardware

The Grand Tour 1

The Stratagy IVP8 voice processing circuit card (shown at right) supports up to eight ports, and installs in selected card slots of a Strata CTX or Strata DK Base or Expansion Cabinet/Key Service Unit (KSU).

Each Stratagy IVP8 has been preprogrammed at the factory for out-of-box (plug-and-play) operation on

the Strata CTX. This includes the KSU integration and6036 configuration parameters, default station (extension

number) User ID mailboxes, and company greeting and instructions.

The supported systems and recommended software versions are:

•Strata CTX100/CTX670 — all releases

•Strata DK40i/DK40/DK16e/DK16 — all releases

•Strata DK424i/DK424/DK280 — all releases

•Strata DK24/DK56/DK96 — Release 4

The Stratagy IVP8 requires Stratagy Admin software, installed on a separate IBM-compatible Stratagy Admin PC, for local or remote administration and maintenance.

Voice mail integration is provided by Strata CTX or Strata DK in-band (DTMF) integration. Strata CTX, DK424i, DK424 and DK280 can also provide integration using the Simplified Message Desk Interface (SMDI) output of the BSIS, PIOU, PIOUS, RSSU, RSIU, or RSIS SMDI port.

Hardware

The Stratagy IVP8 consists of a flash drive with approximately four hours of storage, an internal modem, a status light, and eight voice ports with corresponding voice port status lights (see Figure 1).

The Stratagy IVP8’s two serial ports are allocated as follows: Serial Port 1 is reserved for SMDI and Port 2 for the Stratagy Admin PC connection.

Stratagy IVP8 Installation Guide 01/02 1