Installation
Step 9: Configure Stratagy Admin Software
Step 9: Configure Stratagy Admin Software
Settings for the communication port in Stratagy Admin must match the corresponding parameters set in the Stratagy System Configuration file on the Stratagy IVP8.
For example, the Stratagy Admin PC serial port settings made in the Serial Port field of this procedure must be identical to the serial port definitions (i.e., set serial_port) set in the Stratagy IVP8’s System Configuration file (see “Stratagy System Configuration” on page 24).
Note The menu screens detailed in this section are only available with Stratagy Admin version VSA.2G or later.
➤To configure Stratagy Admin software
1.From the C:\ADMIN3 DOS prompt, type admin and press Enter. The Stratagy Admin screen displays.
2.From the Stratagy Admin Main screen, press 2 or highlight the Configure Admin option and press Enter. The Admin PC Configuration screen displays (shown right).
Note Press F1 for help with | 3230 |
any settings in the
Stratagy Admin Configuration screen.
3. Make any changes needed. See Table 2 on page 19 for a description of each of the fields.
Note Press F2 in the Serial Port and Baud Rate fields to display a
4.To save your changes, you must have the cursor in the last field (i.e., Modem Init String), and press Enter or the arrow down (↓) key
...or to exit without saving your changes, press Esc at any time. The program returns to the Stratagy Admin Main screen.
18 | Stratagy IVP8 Installation Guide 01/02 |