Toshiba IVP8 manual Field Description/Default

Installation

Step 9: Configure Stratagy Admin Software

Table 2 Stratagy Admin PC Configuration Fields

Field				Description/Default
	Advertising string that displays when the Main Menu screen blanks after a specified number of
Advertising	minutes of inactivity (per tmo_blank parameter in the install.cfg file).
	Possible values: 60-character string. The single quotes are required.
	Default: ‘Stratagy ADMIN’
	System log file name. This log file contains connection information, any execution error information,
	and file copy actions.
	Note		It is a good idea to periodically archive or delete this file once or twice a year, whenever
Log File			you perform preventive maintenance.
	Possible values:			Eight-character file name, plus three-character extension. The single quotes are
				required.
	Default:		‘Remote.LOG’
	Port number
Serial Port	Possible values:			1~2
	Default:		2
	Baud rate of serial port.
Baud Rate	Possible values:			1200, 2400, 9600
	Default:		9600
	Sets modem initialization string. The modem initialization string can be changed to work with
	specific brand modems. Refer to the user’s manual for your individual modem for the initialization
	string.
	Note		The protocol used by Stratagy Admin does not support error correction, data compression,
			or auto baud rate adjustment. If problems are encountered connecting remotely, turn
			these parameters off on the Stratagy Admin PC modem. Refer to your modem user guide
			for instructions.
	Default:		AT&F&C1&D2L0Q0V0X0E1
	where:
	AT	The command that tells the modem to come to Attention.
	&F	Return to factory defaults.
		Instructs the modem to use the factory set parameters.
Modem Init	&C1	Data Carrier Detect (DCD) signal.
String
		Set to on, it indicates presence of a data carrier.
	&D2	Data Terminal Ready selected.
	L0	Speaker volume.
		Off or low volume.
	Q0	Mode responses.
		Enables result codes to be issued to the screen.
	V0	Result code format.
		Numeric format.
	X0	Extended result codes.
		Disables monitoring of busy tones unless forced otherwise by country requirements. Sends
		only OK, connect, ring, no carrier, error and no answer result codes.
	E0	Command Character Echo.
		Disables echoing of the commands to the screen.

Stratagy IVP8 Installation Guide 01/02 19