Toshiba IVP8 manual OK, let’s get started

4

5

6

'R￿\RX￿ZDQW￿WR￿DFWLYDWH￿WKH￿'66￿%XV\￿/DPS￿IHDWXUH"

PDKU/BDKU cards must be installed and programmed for a DSS Console.

❐Install and program the PDKU/BDKU in the Strata CTX.

❐Refer to the Strata CTX Programming Manual for DSS programming.

❐Set the dss_active parameter to TRUE.

❐Configure the DSS Port field on the User Menu – Options screen for each mailbox.

$UH￿\RX￿JRLQJ￿WR￿KDYH￿60',"

SMDI is required for the Call Record feature with Stratagy Release 3.3/IVP8. A BSIS card must be located close to the Stratagy.

❐Install and program serial card BSIS in the Strata CTX. Refer to the Strata CTX Programming Manual.

❐A serial cable must be installed between the BSIS card and the Stratagy. Toshiba’s PPTC-9 (with six- conductor line-cord) is recommended.

❐Stratagy’s serial Port 1 is reserved for SMDI communication.

:DQW￿WR￿V\QFK￿￿6WUDWDJ\￿V\VWHP￿WLPH￿ZLWK￿6WUDWD￿&7;"

SMDI is required if the Stratagy is going to be synched with the Strata CTX system time. Night Transfer Alternate Routing and Busy Station Identification do not require SMDI.

❐For clock synch, you must configure the ksu_time parameter and connect SMDI.

❐For Night Transfer Alternate Routing and Busy Station Identification, you must configure the console_slot_ID and DSS_active parameters.

7 $OO￿VHW"￿-XVW￿D￿IHZ￿PRUH￿WKLQJV￿￿￿

❐Be sure to change the default password of the Shutdown Mailbox User ID 983 (see page 40 in the Stratagy IVP8 or Stratagy DK Installation Guide).

❐Don’t forget to wear the anti-static wrist strap during handling.

❐When using an internal modem in the Stratagy Admin PC, remember that Stratagy Admin does not work with COM 3 or 4. Do not write over the Stratagy Admin subdirectory on your remote PC when installing the newer version of Stratagy Admin. Always retain previous versions of Admin.

❐Make sure your Strata I&M/Programming Manuals and Stratagy I&M Manuals are handy. Be sure to read the entire Stratagy IVP8 or Stratagy DK Installation Guide before installing.

❐Remember to back up your database after installation.

If you have read and completed this checklist, installation will be a breeze!

OK, let’s get started!

4011045