Installation | 2 |
|
|
Before starting the installation, read through these instructions thoroughly. Important information is included in this guide that is crucial to a successful installation.
Step 1: Unpack and Inspect Stratagy IVP8
1.When you receive the system, examine all packages carefully and note any visible damage. If you find any damage, do not open the packages. Contact the delivery carrier immediately and make the proper claims.
2.Check the items contained in the packages against the packing list. In addition to the hardware components, you should receive an
3.Inspect all equipment for damage. If equipment is missing or damaged, contact your supplier immediately.
4.Remove any shipping tape and packing material used to protect the system during shipment. Retain the packing materials for
CAUTION!
You will be handling the Stratagy IVP8 when it is most fragile — unpacked and exposed. The Stratagy IVP8, if handled properly, will give long, reliable service. To ensure that the unit is not damaged during installation or maintenance, follow these precautions.
Damage may not always be immediately evident (e.g., no physical damage on the outside of the unit) and system failure may result weeks or months later.
•Handle the Stratagy IVP8 with care. Mechanical shock from dropping, shaking, excessive force when seating the board into the slot, rocking a connector on or other activities can severely damage the disk assembly or the disk’s printed circuit board.
•Wear the
•Hold the Stratagy IVP8 by the edges or the strap and never touch the board’s surface. Pressure on the printed circuit board or contaminants from your hands (e.g., skin oil, food particles, hand lotion) can cause component failure.
Stratagy IVP8 Installation Guide 01/02 | 9 |