Mitel 5055 manual Strings are optionally manipulated, then sent

		Appendix B — Web Configuration Tool
Table 14 Web Configuration Tool: Dialing Plan
Setting Name	Values (bold = default)	Notes
		When activated, this optional feature forces
		all dialed digits to use the inter-digit timer
Global timer	Off On	specified in Timer.
		The Dial soft-key will be disabled as the
		dialed digits will be dialed automatically
		after the timer has expired.
		Optional parameters sets the duration of the
		inter-digit timer. When invoked using the
	1 2 3 4 5 6 7 8 9	“.T” parameter or the Global timer setting,
Timer		the timer monitors the keypad for a pause in
	seconds	digit entry. When a pause is detected, the
		digits are optionally modified, then sent to
		the SIP registration server or alternate
		server.
		Enter a partial or complete digit string (of a
		minimum 2-digit length) for use as a
		template to test dialed digits. Matching digit
		strings are optionally manipulated, then sent
		to a SIP server for dialing
		If the value of one or more digits is likely to
		be variable, then you can enter the wildcard
		character “x” in place of each variable digit.
		The square brackets [ ] can be used to
		specify a set of digits, any one of which can
		match a dialed digit. For example [123]
		would yield a positive match if the user dials
		“1”, “2” or “3”, but would fail to match “4”.
		The “.T” timer parameter (which must be
Dialed Digits	<blank>	placed at the end of a digit string) causes
		the phone to accept an arbitrary number of
		digits form the user. Once the user has
		finished entering digits (signaled by no new
		digits for a period equal to the timer value),
		the digit string:
		• may have digit manipulation
		performed on it
		• is sent to the SIP registration server
		without requiring the user to press
		the Dial soft key.
		Note: The digits to follow field must be
		set to 0 for the .T parameter to
		work.
		Maximum 16 digits.
Digits to follow	0	Optionally, enter the number of digits
		expected to follow the partial number
		specified under Dialed Digits here.
Digits to remove	0	Optionally, enter the number of leading
		dialed digits to be deleted from the dialed
		number here.

- 61 -