Mitel 5055 manual # sip proxy port proxyport=

Appendix C — Configuration Files

#transport protocol for sip

#this parameter can be overwriten by dialing a url with this parameter: transport= udp

#or transport = tcp

#choice [1-tcp, 2- udp]

trans_protocol= 2

#sip proxy address

#When dialing a number or user_id only, the proxy address will automatically be appended

#to the number (or id) as number@proxy or user_id@proxy

#The proxy address can be in IP address or domain.com format

proxy_addr=

#sip proxy port proxy_port= 5060

#outbound_state

#choice [0-NO, 1-YES]

#if YES, all the sip requests and responses will always be sent to the outbound_ip.

#Otherwise, the sip responses will be sent to the "via" address. The requests will be sent to

#"route" or "contact", according to the rule defined by the sip specs.

outbound_state= 0

#outbound proxy ip address

#1) if, for some reason, the sip phone must send request to a local sip proxy first,

#config this outbound sip proxy ip address

#2) if the above proxy_addr (domain.com) is not resolvable from the DNS server,

#this ip address will be used in place of the proxy address

outbound_ip= 192.168.0.1

#outbound server proxy port outbound_port= 5060

#sip registrar address

#could be same as or different from the proxy_addr above registrar=

#sip registrar port

registrar_port= 5060

#Registration duration in seconds for each register request

#the server may respond with a different duration

register_expire= 7200; in seconds

#Registration authentication method

#choice [0-NONE, 1-BASIC, 2-DIGEST] auth_method= 0

#sip voice mail server addresssip phone willsend the "subsrib" request for message- summary to this address

voice_mail_srv=

#auto forward to voice mail server after num of rings

voicemail_ringnum=4

#sip voice mail server port voice_srv_port= 5060

#emergency number

#integer string

#when user dials this string, the phone will send the sip request to e911_ip emerg_number= 911

#emergency ip address

#must be an ip address

emerg_ip= 192.168.0.1

# e911 port number

- 79 -