Mitel 5312 IP manual For Users on Resilient 3300 ICP Systems, Line Interface Module

Page 13

5312/5324 IP Phones User Guide

For more information on installing and using this application, see the Mitel Unified Communicator Express documentation available at www.mitel.com.

Using Your IP Phone in Remote Mode

Remote Mode allows the 5312 and 5324 IP Phone to be used as a Teleworker in the home or in other locations away from the office. For information on how to program your IP Phone for remote operation, refer to the Teleworker Solution (6010) Remote IP Phones User Guide available at www.mitel.com

About Feature Access Codes

Use of some features requires dialing access codes. Ask your Administrator for a list of codes you should use.

For Users on Resilient 3300 ICP Systems

If during a call, you hear two beeps repeated every 20 seconds it means that your phone is switching to a secondary 3300 ICP system. The call continues but some of the keys and features on your phone function differently. The keys and most features begin working normally again after you hang up. If your phone switches to the secondary system while your

speaker or handset is muted (that is, while the MUTE light is on), the call remains muted until you hang up. Normal operation resumes when your phone switches back to the primary system. If your phone is idle and switched to the secondary system, you'll see a flashing rectangle on the display. The rectangle remains until the switch to the primary system is complete.

Line Interface Module

The Line Interface Module is an optional device that adds an analog phone line (POTS) capability to your 5324 IP phone only. If Emergency Call Routing is not programmed on your 3300 ICP, you must use the Line Interface Module to dial emergency calls. For more information on emergency number dialing, refer to Emergency Calls. If you have a Line Interface Module connected to your 5324 IP Phone, all programming of the Line Interface Module, except the Analog Key, is done by the Installer when your phone is installed. For more information, refer to "Using the Line Interface Module" elsewhere in this guide. Note: The 5312 IP Phone does not support the Line Interface Module.

- 5 -

Image 13
Contents Page Page Trademarks Page Tips for Your Comfort and Safety Call Handling Using the Line Interface Module 5324 IP Phone only Page About Your Phone IP Phone Elements of Your Phone FeatureFunction Using Your IP Phone with Mitel Unified Communicator Express Ring/Message IndicatorsWhen indicator is It means that Selecting Menu OptionsLine Interface Module For Users on Resilient 3300 ICP SystemsAdjust the viewing angle Tips for Your Comfort and SafetyDont cradle the handset Protect your hearingSpeaker Volume Control Handset Receiver Volume ControlCustomizing Your 5312/5324 IP Phone Ringer ControlFeature Keys Language Change Making and Answering CallsMake a Call Answer a CallEmergency Calls Emergency Calls When Emergency Call Routing not ProgrammedAuto-Answer Emergency Calls When Emergency Call Routing ProgrammedPhonebook Redial Saved Number RedialSpeed Call Keys Speed Call Personal Handsfree Operation Group Listen Hold Call HandlingMute Conference TransferAdd Held 5324 IP Phone only Conference SplitSwap Call Forward5312/5324 IP Phones User Guide Call Forward Remote I am Here Call Forward Forced 5324 IP Phone only Call Forward End ChainingCall Forward Override Messaging Callback Messaging Advisory5312/5324 IP Phones User Guide Messaging Cancel Callback Using Other FeaturesMessaging Cancel All Callbacks Account CodesCall Park Attendant Call Hold Remote RetrieveCampon Call PickupOverride Do Not DisturbPaging Direct Paging Direct Paging Handsfree Answerback EnabledTo answer the Direct Phone state before Page arrivesTo answer the Direct Page indicated by single burst of tone Direct Paging Handsfree Answerback DisabledTimed Reminder 5324 IP Phone only Direct Voice CallHeadset Operation Group Paging / Meet Me Answer MusicPhone Lock User PIN 5324 IP Phone only Record a Call Trunk FlashHot Desking Hot Desk Remote Logout Call History Tag CallNight Answer Mobile Extension ReleaseUsing the 5310 Conference Unit with a Mouse Using Your 5324 IP Phone with the 5310 IP Conference UnitAdjust the Conference Unit Volume Turn the Conference Unit On and OffPlace the Conference Unit in Presentation mode Using the 5310 Conference Unit without a MouseMute the Conference Unit Exit the ConferenceLine Interface Module Mode Using the Line Interface Module 5324 IP Phone onlyMake a Call Answer a CallPress the Line Interface Module key Hold a Call Answer a Waiting Call on the Line Interface Module LineEnd a Call Press the Line Interface Module key Failover Mode5312/5324 IP Phones User Guide Feature Access Codes Feature Access Codes5312/5324 IP Phones User Guide 5312/5324 IP Phones User Guide