Installing a Single Carrier | Installing the MDW 9031/9031DCP Pocket Phone 2 | ||
|
|
|
|
4Remove the plastic cap covering each radio module’s card edge before inserting the radio modules into the carrier.
5Starting from the leftmost slot (#1), insert each radio module into the carrier by hooking it onto the radio module mounting rod. Slowly swing the radio module’s card edge into the card edge connector on the back of the carrier.
6When the card edge is fully seated, a snap lock on the bottom of the radio module will engage.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use | Issue 3 October 1999 37 |