3 Using the MDW 9031/9031DCP Pocket Phone | Handset | |
|
|
|
Making a Call
To make a call using your MDW 9031/9031DCP, use the following procedure:
1Press the handset Obutton (or the headset Obutton if you have the headset attached) to turn the phone on.
~The MDW 9031/9031DCP seizes an available line and a truncated triangle or a small rectangle (depending on your communications system) appears around that line in the handset display.
~You hear a dial tone.
2Dial the call as you would on a wired system phone.
3To end the call, press the Obutton.
After 15 seconds, unless there is other activity on the phone, the handset goes into the
Answering a Call
When you receive a call on your MDW 9031/9031DCP Pocket Phone, you hear a ringing tone if your alerter is enabled, or you feel a vibration in the handset if the vibrator is enabled, or both. To answer the call, use the following procedure:
1Press the handset Obutton (or the headset Obutton if you have the headset attached) to turn the phone on.
You are automatically connected to the ringing line.
2Speak into the handset to converse with your caller.
3To end the call, press the Obutton.
After 15 seconds, unless there is other activity on the phone, the handset goes into the
Manually Selecting a Line or Programmed Button
When you are making or answering a call, the MDW 9031/9031DCP automatically selects the line for you. In some situations, however, you may want to select a particular line (for example, to use an “800” line). To select a particular line or programmable/intercom/drop button, use the following procedure:
1Press O.
The ON icon displays steadily, and you are connected to an available line.
2If the Selection rectangle in the handset display is not surrounding the row that includes the line or button you want to use, press "one or more times until the rectangle encloses that row. (See “Column and Select Buttons” earlier in this chapter for more information.)
3Press the '’button that corresponds to the line or button within the Selection rectangle that you want to select.
You are connected to the line or you have access to the button you chose.
88 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |