Lucent Technologies MDW 9031DCP manual Battery Charger Features

Page 99

Battery Charger	Using the MDW 9031/9031DCP Pocket Phone 3

Battery Charger

The battery charger charges battery packs in the spare battery compartment and in the handset. If both are present at the same time, charging in the spare battery compartment is suspended until the battery pack in the handset is fully charged. To enable extended phone usage, you should purchase an extra battery pack and store it in the charger, so that you always have a charged battery pack to switch to, if necessary. This section describes the battery charger and explains how to use battery packs properly.

Spare Battery

Compartment

Handset

Guide Rail

Spare Battery Guide Pin

Cradle

Spare Battery	REFRESH Button
Spare Battery
Compartment
Battery Contacts	REFRESH LED
	Handset Cradle
	Battery Contacts
Spare Battery	HANDSET LED
Compartment	SPARE LED
	SPARE LED

Note: Do not touch, push, or pull any exposed battery contacts.

Battery Charger Features

The battery charger offers these features:

•The spare battery compartment refreshes the battery pack automatically by fully discharging it before recharging it. This process reduces or eliminates the potential “memory” effect. Memory effect, which reduces a battery’s capacity, occurs over time when you repeatedly recharge a battery before it is fully discharged.

•The handset cradle charges a battery pack in the handset.

•The REFRESH button, when pressed, refreshes the handset battery pack in the handset cradle by fully discharging the battery pack before recharging it.

•The REFRESH LED and the HANDSET LED light when the REFRESH button is pressed and stay lit until the battery pack finishes discharging.

•The HANDSET LED, when lit, indicates that the handset battery pack is installed in the handset, and the handset is in the handset cradle.

•The SPARE LED, when lit, indicates that a battery pack is in the spare battery compartment.

Note: Before you use the MDW 9031/9031DCP Pocket Phone handset for the first time, the battery pack must be charged.

MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166

Issue 3 October 1999 91

Image 99

Contents TransTalk Digital Wireless System Page Copyright and Legal Notices Copyright and Legal Notices Contents Contents Using the MDW 9031/9031DCP Pocket PhoneAppendix B Regulatory Information 143 Vi Issue 3 October TransTalk 9000 System What Is a Wireless Phone?Introduction About TransTalk 9000 ProductsIntroduction About TransTalk 9000 Products Multiple 5 Max Carrier InstallationAbout the MDW 9031/9031DCP Pocket Phone Introduction Where Can You Use Your Pocket Phone?About the MDW 9031/9031DCP Pocket Phone Privacy InformationIntroduction About the MDW 9031/9031DCP Pocket Phone Parts ListTranstalk Additional PartsSpare Battery and Headset Installing the MDW 9031/9031DCP Pocket Phone Important Safety InstructionsGuidelines for Safe and Efficient Operation Basic Safety Precautions for Installation and Use Page Additional Safety Instructions for Installation Personnel AC Outlet Check Installation Overview for Radio Modules and Carriers Radio Module/Switch WiringSwitch Interface Pin # Pass Key ComponentsOUT of Sync LED CONTROL/EXPANSION LED Positioning a Radio Module or Carriers Radio module cannot be installed outdoors Carriers Installing a Single Radio ModuleInstalling a Single Radio Module Dio Single Radio Module Installation Self-Test Understanding Your Model 117A3 Carrier Understanding CarriersPower DIP Control/Expansion Setting the 117A3 Desired Range approximate Power DIP Switch Settings Setting the 117A3 Carrier Control/Expansion DIP Switch Issue 3 October CONTROL/EXPANSION LED Understanding Your Model 117A4 CarrierLabel Explanation Control carrier = green LEDExpansion carrier = amber LED Page Installing a Single Carrier Installing a Single Carrier on a Shelf or Desk Installing the MDW 9031/9031DCP Pocket Phone Page Music Go to Single Carrier Installation Self-Testpage Installing a Single Carrier on a Wall Page Music Go to Single Carrier Installation Self-Testpage Control Single Carrier Installation Self-TestInstalling Multiple Carriers Mounting and Cabling Multiple Carriers From Control Carrier Issue 3 October If the carriers are plugged Then Into Multiple Carrier Mounting and Cabling Self-Test Go to Installing a Single Radio Module in Each Carrier Installing a Single Radio Module in Each Carrier Page If the carriers are plugged Then Into 117A4 117A3 Control Go to Installing the Remaining Radio Modules Installing the Remaining Radio Modules Page Music Go to Installation Self-Test for Remaining Radio Modules Installation Self-Test for Remaining Radio Modules Go to Handset Inserting and Removing the Handset’s Battery Pack Installing the MDW 9031/9031DCP Pocket Phone HandsetHandset Handset Installing the MDW 9031/9031DCP Pocket Phone Changing the Communications System SettingMapp Filling Out the Handset Label Battery Charger Positioning the Battery ChargerInstalling the Battery Charger Battery Charger Installing the MDW 9031/9031DCP Pocket Phone Inserting a Battery Pack into the Spare Battery Compartment Removing a Battery Pack from the Spare Battery Compartment Removing the Handset from the Handset Cradle Guide PinsUsing the MDW 9031/9031DCP Pocket Phone Handset Controls Using the MDW 9031/9031DCP Pocket Phone HandsetColumn and Select Buttons Handset Using the MDW 9031/9031DCP Pocket PhoneHandset Display with Backlighting MSG Range onLclp Or fully extended for maximum range to use the Pocket Phone RectangleCarrying Your Pocket Phone Volume ControlAttaching the Metal Carrying Clips Antenna Changing the Handset SettingsChanging Communications System Button Mapping Setting Enabling or Disabling Line Preselection Enabling or Disabling Backlighting Enabling or Disabling the Alerter Test Modes Using Local Test ModeUsing Wireless Test Mode Display Number Signal Strength Is Display Number Voice Quality Is Close Up Test Waking Up the Phone Making a Call Answering a CallManually Selecting a Line or Programmed Button Accessing Certain Voice Mail Systems with a Definity System Using a HeadsetPreselecting a Line Headset Battery Charger Using the MDW 9031/9031DCP Pocket Phone Battery Charger FeaturesUsing the MDW 9031/9031DCP Pocket Phone Battery Charger Extending Battery LifePage Using the MDW 9031/9031DCP Pocket Phone Battery Charger Removing Radio Module from Carrier Maintaining the MDW 9031/9031DCP Pocket PhoneMaintaining the MDW 9031/9031DCP Pocket Phone Control Swapping Extensions Control Lucent Direct Sales Center Part Ordering Replacement and Optional PartsReplacing Antenna National PartsPage Ordering Replacement and Optional Procedures TroubleshootingInstallation Problems Troubleshooting ProceduresSymptom Possible Causes Possible Solutions Power LED ~ OUT of Sync = all lit ~ OUT of Sync = not lit~ CONTROL/EXPANSION = all lit Procedures Troubleshooting Handset ProblemsChange Buttn Battery Problems Issue 3 October Check Control Voice Quality ProblemsSymptom Possible Causes Possible Solutions PARTNER, Partner Range Problems Each radio module light when Been Placed on Hold Module. Your Call has notBattery Charger Problems Symptoms Possible Causes Possible SolutionsHandset LED on Handset LED Handset LED does Troubleshooting Procedures MDW 9031/9031DCP Pocket Phone Compatibility OverviewMDW 9031 Compatibility Partner Partner Merlin Communications System CompatibilityPartner Systems Button Mapping for Partner Systems Expansion carriers To Delayed RingCarriers one control and two SystemIssue 3 October Recall Button Mapping for Merlin 410 and Merlin 820 Systems Definity G1 R1V4 Ring To Delayed RingAccessing Certain Voice Mail Systems with a Definity System Drop BCC SPE B Issue 3 October MDW 9031DCP Compatibility Programming Features for Definity SystemsSPE B Station Feature Options Programmable buttons buttons 1-7. Button 8 is a firmware Feat/P 9031DCP Pocket Phones with Definity Systems Issue 3 October Warranty and Repair Information Repair Information In-Warranty RepairsPost-Warranty Repairs Warranty and Repair InformationHearing Aid Compatibility Regulatory InformationFCC Part 15 Rules IC RSS-210 ComplianceRegulatory Information Hearing Aid Compatibility MDW 9031/9031DCP Wireless Pocket Phone SpecificationsSpecifications General Index Index Index Index Vibr Index Battery Charger Wall-Mounting Template

Related manuals

Manual 12 pages 23.19 Kb