3 Using the MDW 9031/9031DCP Pocket Phone | Handset | |
|
|
|
Attaching the Metal Carrying Clips
To attach the metal carrying clip to the battery pack, do the following:
1Remove the battery pack from the handset, as described in “Inserting and Removing the Handset's Battery Pack” in Chapter 2.
Standard Spare |
Battery Pack |
Extended Spare |
Battery Pack |
2Place the two metal tabs on the clip into the slots on the battery pack, with the “hooks” toward the bottom of the battery pack.
3Slide the clip toward the bottom of the battery pack to engage the hooks.
4Reinsert the battery pack in the handset, as described in “Inserting and Removing the Handset’s Battery Pack” in Chapter 2.
Attaching the Plastic To attach the plastic clips to the battery pack, do the following:
Clips
1Remove the battery pack from the handset, as described in “Inserting and Removing the Handset's Battery Pack” in Chapter 2.
2Hold the battery pack so that the back of the battery pack is facing you.
3Hold the carrying clip so that it looks like the letter “ T.”
76 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |