Lucent Technologies MDW 9031DCP manual Mapp

2 Installing the MDW 9031/9031DCP Pocket Phone Handset

4Press and hold “M” ( 6) for three seconds to enter Button Mapping Mode.

The handset display shows one of the following:

MAP:P	PARTNER Systems
MAP:D	DEFINITY Systems, System 25, System 75, and
	System 85
	Note: The MDW 9031DCP should only be set
	to MAP:D for DEFINITY.
MAP:M1	All MERLIN Systems (except MERLIN 410
	and MERLIN 820), including MERLIN LEGEND
MAP:M2	MERLIN 410 and MERLIN 820

5Press " repeatedly to cycle through the settings until the display appropriate for your communications system is shown.

6Press Owhen the correct setting is displayed.

The top line of the display shows information appropriate to the communications system you are using.

7To verify your setting, repeat Steps 1–3.The top line of the display should appear as follows, depending upon your communications system:

PARTNER Systems	LCL:P
DEFINITY Systems, System 25, System 75, and	LCL:D
System 85
All MERLIN Systems (except MERLIN 410 and	LCL:M1
MERLIN 820), including MERLIN LEGEND
MERLIN 410 and MERLIN 820	LCL:M2

For a description of the button mapping between the MDW 9031/9031DCP Pocket Phone and the wired telephones for your communications system, or to program features on buttons, see the appropriate “Button Mapping” topics in Chapter 6.

62 Issue 3 October 1999 MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166