GETTING STARTED
Connecting your Telephone
1.Carefully remove your telephone from its box. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase.
2.Check to be sure that you have all items that come with your XL50 telephone.You should have a Hand set, Base Unit,AC Adapter, Mounting Bracket, Han dset Line Cord, and Telephone Line Cord.
Choosing a Location
•The XL50 requires a modular phone jack and a standard 120 Volt outlet for operation.
•The unit should be located in an area where it is easy to see the visual display and lighted ringer.
•Choose a location that is out of the way of normal activities.
•The unit can be used as a desk top phone or wall mount phone.
CAUTION: Always connect the AC adapter to the phone before you connect it to the AC power.When you finish, disconnect the AC power before you disconnect it from the telephone.
Desk Mounting Instructions
Follow these instructions to place the phone on a desk or table top using the supplied bracket.
1. | Plug one end of the long flat telephone line cord into |
|
| the jack marked LINE located on the back of the |
|
| telephone. Plug the other end into the telephone wall |
|
| jack. See Figure 2 | 1 |
2. | Insert the plug of the AC adapter into the jack marked | 2 |
| DC 9V located on the back of the base unit.Then plug |
|
| AC adapter into wall outlet. See Figure 2. | Figure 2 |
15