ClearSounds V508 manual Pre-Dial, Adjusting the Volume while in use, Muting the Microphone

Dial the telephone number.

Adjust your Volume and Tone setting if needed.

To end the call, just press the END KEY or return to base or charger.

Pre-Dial

You can also pre-dial a number in standby mode, which will allow you to make corrections before dialing.

Enter a phone number (up to 32 digits to use a calling card or dial internationally use the RIGHT key to insert a Pause), review the number.

When the correct number appears, press the DIAL KEY.

NOTES: If you make a mistake while entering a number, press the ERASE soft key to clear the last digit You can store up to 10 tele- phone numbers in the memory for automatic dialing You can also make a call to the last number dialed by using the redial feature. As featured in Last Number Redial.

Adjusting the Volume while in use

During the conversation you can use the UP or DOWN KEY to adjust the level of the earpiece (or hands-free speakerphone - if activated) from V1- V5. The selected volume will be display on the LCD.

You can also select the earpiece volume or the speaker volume by the Audio Setup menu.

Muting the Microphone

During a conversation you can temporarily switch your phone’s microphone off, so that the other party cannot hear you.

To mute the microphone Press the MUTE SOFT key during the conversation. “Call Muted” appears on the LCD screen.

To un-mute the microphone press the MUTE SOFT key again, this will restore normal condition.

Using the Speakerphone

During a conversation you can turn on the speakerphone built in the handset. When using the Speakerphone you can simply put your handset down and enjoy a handsfree conversation.

To turn the speakerphone on, press the DIAL KEY during a call, the line must be in-use for the speakerphone feature to work.

To turn the speakerphone off, simply press the DIAL KEY again during your conversation.

NOTE: Before picking up the handset and putting it up to your ear be

9 – ENGLISH