MOUNTING HARDWARE PACKED WITH YOUR UNIT
4 |
| 4 | – Washers |
4 | 4 | – Cord hooks | |
4 | – 1” Spacers |
|
|
4 | – 2” Phillips head screws |
|
|
1 | – Mounting template |
|
|
| FRONT | FRENTE | |
BEFORE MOUNTING
CAUTION: To reduce the risk of fire, do not place any heating or cooking product beneath this unit.
•Select a location to mount the Kitchen Companion
•Make sure that there is an electrical outlet nearby
•Follow the section of Installing the Phone and Telephone Operation to check if the phone works well at the selected location
•Follow the section of Radio Operation to check if the radio works well at the selected location
•Disconnect the AC power supply to the Kitchen Companion when mounting.
Empty the contents of the cabinet under which the unit is to be mounted and thoroughly clean the underside to remove any greasy residue. We recommend the unit be mounted at the front edge of the cabinet.
IMPORTANT: For secure mounting, the screws must go into the unit to a depth of at least 3/8". If the overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 5/8", you will need to use a wood shim. The shim can be located between the cabinet shelf bottom and the spacers. Make sure the wood is at least as thick as the excess over 5/8". If a shim is necessary, longer screws (available at most local hardware stores) are required.
EN
8
11 | 5/20/2005, 12:09 PM |