EN
MEMORY
Memory is available at the handset only. Store up to ten
STORING A NAME AND NUMBER IN MEMORY
1.Make sure the phone is OFF (not in TALK mode).
2.Press the mem button.
3.Press the desired memory location (0 through 9).
4.Press the mem button again. The display shows ENTER NAME.
NOTE: If you don't want to enter the name, skip step 5.
5.Use the handset’s
For example, to enter the name Bill Smith, press the two key twice for the letter B, press the four key three times for the letter I, and press the five key three times for the letter L. After one second, press the five key three times again for the second letter L and press the one key to insert a space between the letter L and S. Press the seven key four times for the letter S, press the six key once for the letter M, press the four key three times for the letter I, press the eight key once for the letter T, and press the four key twice for the letter H.
NOTE: If you enter a wrong letter, press channel/delete button to backspace.
6.Press the mem button to save the name. The display shows ENTER TEL NUMBR.
7.Use the
8.Press mem again to store the number. You will hear a confirmation tone.
CHANGING A STORED NUMBER
1.Repeat steps 1 through 7 in Storing a Name and Number in Memory.
2.Press the mem button and REPLACE MEMO? shows in the display.
3.Press TONE*/exit to exit, or press the memory button to store the number. You will hear a confirmation tone.
STORING A REDIAL NUMBER
1.Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2.Press the REDIAL button.
3.Press the mem button to store the number. You will hear a confirmation tone.
31
34 | 5/20/2005, 12:09 PM |