A. When the power supply cord or plug is damaged or frayed.
B.If the product has been exposed to rain or water.
C.If the product does not operate normally by following the operating instructions.
D.If the product’s cabinet has been damaged.
E.If the product exhibits a distinct change in performance.
18.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
19.Do not use the telephone to report a gas leak in the vicinity of the leak.
20.Do not place this product on an unstable cart, stand or table.
The product may fall, causing serious damage to the product.
21.Plug the adaptor to a
22.
Risk of explosion if battery is replaced by an incorrect type, use only
SANIK,
of used batteries according to the instructions.
23.For servicing or replacement, you can purchase a suitable headset through service center or retailer shop (see in www.oregonsicientic. com)
CAUTION
To reduce the risk of fire, use only
No. 26 AWG or larger
telecommunication line cord.
CAUTION
You must use a Class 2 power source that supplies 120V DC and delivers at least 650mA. Its plug must fit the phone’s DC IN 12V
jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.
Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect from the phone.
SAVE THESE INSTRUCTION
2
EN
5 | 5/20/2005, 12:09 PM |