On a Wall Plate or Wall
To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the base.
Drill two holes 315/16 inches apart. Thread a screw into each hole, letting the heads extend about 1/8 inch.
1. Insert the two
tabs at the top
of the narrow end of the
supplied bracket into the base’s lower tab slots, then
press down on
the bracket’s latches and insert them into the upper slots.
2.Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.
4.Route the
adapter and modular cords through the base’s grooves.
5.For a wall plate, plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
Installation
11