Installation
CAUTION
You must use
!a Class 2 power source
that supplies 9V DC and delivers at least 210 mA. Its center tip must be set to positive and its plug must fit the charger’s DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the handset or the adapter.
For direct wall mounting, align the base’s keyhole slots
with the
mounting screws and slide the base downward to secure it.
6.Plug the adapter into a standard AC outlet.
7.Lift the base’s antenna to a vertical position.
8.Press and push up on the handset holder to lift and remove it. Turn it over and rotate it 180°, then slide it down into its slot and snap it back into place so it holds the handset.
9.Connect the handset cord to left side of the phone and corded handset.
USING AC POWER
You can power the cordless handset using the supplied 9V, 210 mA AC adapter.
12