Conference bridge
If the conference bridge is reserved again immediately after your conference (15 minutes later), an alert tone sounds to warn you that the conference is approaching its end. 10 minutes before the beginning of the next conference, the connection is ended.
Managing conference bridge calls
The inviting participant has specific managing rights in a conference bridge (moderator). He can activate a lecture mode (only one participant has speaking rights, all others are muted) and drop participants selectively out of the conference. In a conference without the inviting participant, all participants have the rights of a moderator.
Their displays are showing all participants currently in the conference. Each participant is marked with
•M when muted or being listener in lecture mode
•S when being the speaker in lecture mode
1.To start the lecture mode select the designated speaker.
2.Press the OK button.
3.Select Speaker.
4.Press the OK button.
The new speaker appears on the top of the displayed conference participants, marked with a s. All other participants are muted.
5.To change the speaker, select the new designated participant and proceed just like for the first speaker.
6.To return from the lecture mode, select the current speaker.
7.Press the OK button.
8.Select End lecture mode.
9.Press the OK button.
All participants can talk to each other again.
10.To disconnect one conference participant specifically, first select the desired one.
11.Press the OK button.
12.Select Clear connection.
13.Press the OK button.
36 1408/1416 at Integral 5 - User Guide | May 2010 |