17.5.00 | Konfig.fm | Gigaset3035isdn |
Setting up the connection
Press the keys in the specified order
17.5.00 | Konfig.fm | Gigaset3035isdn |
Setting up the connection
Press the keys in the specified order
LQJ÷÷÷÷÷
6HW\VWXSHPGHYLFHVWWLQJV
<Int1DPH÷÷÷÷÷÷÷÷÷÷÷÷0...6=9P
6DYHHQWU\÷÷÷÷ 9
=
#and $
WLQJ÷÷÷÷
<'H6\VUHJLVWHUWPHWWLQJV÷÷÷÷P=
<
Int 1...6 | = |
#and $
Allocating a name to an internal subscriber
You can replace the internal call number allocated to the subscriber at registration (e.g. INT2) with a name.
Call the menu.
Select and confirm.
Select the required internal call number.
Enter a name (see page 171).
The base station telephone now always lists the subscrib- er under this name.
The phone is in standby.
De-registering a handset
Call the base station telephone menu.
Select and confirm.
Enter the base PIN (factory setting 0000) and confirm; the internal subscriber is
All registered internal subscribers are shown on the dis- play.
Select the required internal subscriber and confirm
The phone is in standby.
<
LQJ÷÷÷÷÷
\VWWXSHPGHYLFHVWWLQJV
Int6HQG0...6061÷÷÷÷÷÷÷÷9
MSN 1... 7 | = |
| #and $ |
Allocating call numbers (MSN)
You can now allocate your own call numbers (MSN) to the registered devices. You can define
●which call number an internal subscriber (base station telephone, handset) uses to dial (send MSN),
●under which call number the base station telephone or a registered handset rings (receive MSN).
– Allocating the send MSN
If several call numbers are entered for one internal sub- scriber, e.g. INT 0 for the base station telephone, then the first MSN entered in the list is the send MSN for the time being.
Call the menu.
Select and confirm.
Select required internal subscribers.
Select and confirm the required MSN.
The phone is in standby.
96
97