
17.5.00 | rat.fm | Gigaset3035isdn | Korrektur: 0 |
About your system
Warranty
●Siemens AG guarantees this device for 6 months (Switzerland: 1 year), cal- culated from the date of purchase from the dealer. Please retain your receipt as proof of this date.
●Within this warranty period, Siemens AG shall cover all material or manufac- turing defects free of charge. Siemens AG shall, at its own discretion, fulfil the warranty conditions either through repair or replacement of the defec- tive device.
●The warranty does not cover damage caused as a result of improper use, normal wear and tear or tampering with the device. The warranty does not cover consumable materials or any defects which only have a minor effect on the value and functionality of the device.
●Your Siemens product complies with the technical requirements for connec- tion to the public telephone network.
●Your warranty claims can be made directly to Siemens Service.
Device replacement
When replacing device components, the handset must be registered at the base station telephone again.
Disposal
When your device has reached the end of its service life, please dispose of it in an
| Hotline |
|
|
|
| If your device is faulty please contact the Siemens Service Hotline: | |||
! | Germany: | 0180 5333 222 | Monday to Friday | |
|
|
| Saturday | |
Austria: |
|
|
Switzerland: 012120090
For a repair under warranty, the faulty device must be ac- companied by a completed and stamped warranty card. In the event of a malfunction, please contact the dealer.
Gigaset 3035isdn is designed for operation in your country as indicated on the underside of the unit. Special
The compliance of the unit with the basic requirements of the terminal direc- tive is certified by the CE symbol.
128
17.5.00 | rat.fm | Gigaset3035isdn | Korrektur: 0 |
About your system
The manufacturer declares, that the above mentioned product is manufactured according to the Full Quality Assurance System with the registration number "Q810820M" in compliance with ANNEX V of the
The original declaration has been issued.
Troubleshooting
Symptom | Possible Cause | Solution | |
|
|
| |
The handset is off the | The handset connector | Check the connector, | |
hook, but no dial tone | or telephone connect- | see page 14. | |
can be heard. | ing cable are not insert- | Check the connections | |
There is a fault indicator | ed correctly. | ||
of the NTBA. | |||
in the display. |
| ||
|
| ||
|
|
| |
You cannot dial any | The | Check and correct the | |
call numbers. | has changed. | ||
|
| page 138. | |
| The telephone is | Check the status dis- | |
| locked. | plays, unlock phone if | |
|
| necessary, see | |
| Telephone accounts | page 81. | |
|
| ||
| have been set up. | Enter the account PIN, | |
| Call restriction is active. | see page 55. | |
| Deactivate, see | ||
|
| ||
|
| page 87. | |
|
|
| |
There are no incoming | The handset was not re- | Replace the handset. | |
calls. | placed properly. |
| |
| Call forwarding is set to | Deactivate “perma- | |
| “permanent”. | nent” call forwarding, | |
|
| see page 43. | |
| No MSN assignment to | Define receive MSN, | |
| internal subscriber. | see page 98. | |
| “Internal” access has | Change access, see | |
| been set. | page 99. | |
|
|
| |
The telephone does | The ringer volume is set | Adjust the ringer vol- | |
not ring when a call | to “0”. | ume, see page 69. | |
comes in. |
|
| |
|
|
|
129