BT 1300 Executive manual Base Handset, On the handset

Page 33

On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992

Note

When planning to use a handset with more than one base, we recommend that you:

•Give a number to each base (from 1-4).

•Number each handset (from 1-6).

•Register your handset(s) at base 2 (and 3 & 4 if used) using the same internal number as at base 1.

To register a handset to a base station (if you have changed the System Code from 0000)

▲

▼

COK

The display will now flash Searching for base.

You will then see a list of the available handset numbers.

Use the UP or DOWN button to scroll to the number you require.

Press OK to confirm.

After a few seconds the handset will be registered and display:

At the base:–

S	Press and hold down the		SKIP button
	Press and hold down the		SKIP button
kip

until the PLAY button starts to flash.

Base 1

Handset 2

▲

▼

COK

COK

On the handset:–

Use the UP or DOWN button to scroll to Base.

Press OK to confirm.

The display will show Register.

Press OK to confirm.

C OK C can also be pressed to return to idle.

Note

The number you save becomes the handset’s name (ie. ‘Handset 1’).

▲Use the UP or DOWN button to scroll

▼to Custom.

C OK	Press OK to confirm.

▲Use the UP or DOWN button to scroll ▼ to the required base number.

C OK	Press OK to confirm.

At this stage if you require you can edit the base name.

C OK	Press OK to confirm.

CODE Enter the System Code using the keypad.

C OK	Press OK to confirm.

32

Image 33

Contents User Guide At a glance HandsetBase This guide Setting up Using the telephoneMenu Structure Program keys Menu Structure Introduction Safety informationUnpacking your BT On-Air 1300 Executive For your recordsSetting up Connect the power supply and switch onPlan the location Battery performance Charge the handset battery for at least 16 hoursChanging your handset fascias Connect the telephone line cord after charging your handsetUsing the telephone Call timerMaking and ending calls To use handsfree HandsfreeTo delete numbers shown in the redial list To copy numbers shown in the redial list to the directorySecrecy To switch secrecy on/offName and number directory To dial a number from the directoryPaging handsets Internal callsTransferring calls To make an internal call to another handsetTo switch keyguard off To switch keyguard onTo use your handset when the keyguard is on KeyguardTo set economy mode Economy mode Alarm clockTimer Calls list Caller DisplayTo view the Calls list You have the options toRinger melody and volume To adjust ringer melody and volumeTo adjust keypad beeps and tones Base settings To set the dateTo set the time Page Page To set the time and date Please see To record your own outgoing message OGMTo delete your outgoing message To listen to your outgoing messageRecording incoming messages At the baseAt the handset Playing your messages Incoming message indicator At the handsetAnswering machine operation during message playback To play new messages from the handsetUntil a long beep is heard At the handset To record a memo messageVIP feature To set the VIP access codeTo switch VIP on and off To change your Remote Access Code Remote accessHow to control answering machines functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets On the handset Base HandsetCode General information GuaranteeTechnical information Make sure the Post Office give you proof of postingSwitchboard compatibility Switchboard external line access codeTo set the external line access code RecallTo activate and de-activate the external line access code 122 mm Wall mountingIndex VIP