BT 1300 Executive manual Setting up, Plan the location, Connect the power supply and switch on

Page 8

On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992

Setting up

Please note that your handset is already registered to the base station.

Plan the location

Situate your product close enough to the telephone and mains power sockets so that the cables will reach.

The only way to disconnect the product from the power supply is to remove the power adapter from the mains socket. Therefore you must ensure you plan the location so that the mains power is easily accessed.

Make sure it is at least 1 metre away from other electrical products to avoid interference.

Do not situate the product in the bathroom or other humid areas.

1Connect the power supply and switch on.

IMPORTANT

You must thread the power supply and line cord through the plinth before you connect to the power supply.

Plug the power supply cable into the socket on the underside of your base. The power cable connector and socket are coloured red.

Plug the line cord into the other socket on the underside of the base marked with a telephone symbol.

Plinth

WARNING

Please take care that the power supply and telephone line cord are connected to the correct sockets as incorrect placement could damage your equipment.

Once connected, put the plinth back on the base to prevent it from rocking on the table.

There are two positions for the plinth when joining it to the base, both can be used for desk mounting and one for wall mounting. Position A is for desk mounting only and position B is for desk or wall mounting (see wall mounting on

page 37).

AB

Rubber feet

Hold the black plastic square between thumb and forefinger and peel off individual feet from backing sheet as shown. These are to stop your base from moving and to protect your work surface.

If you decide on position B, place 2 of the rubber feet on the plinth and 2 on the base.

Plug the power adaptor into the wall socket and switch on. When the power is switched on, the button on your base will light up.

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User Guide Base At a glanceHandset Setting up Using the telephone This guideMenu Structure Program keys Menu Structure Safety information IntroductionUnpacking your BT On-Air 1300 Executive For your recordsPlan the location Setting upConnect the power supply and switch on Charge the handset battery for at least 16 hours Battery performanceConnect the telephone line cord after charging your handset Changing your handset fasciasMaking and ending calls Using the telephoneCall timer Handsfree To use handsfreeTo delete numbers shown in the redial list To copy numbers shown in the redial list to the directoryTo switch secrecy on/off SecrecyName and number directory To dial a number from the directoryInternal calls Paging handsetsTransferring calls To make an internal call to another handsetTo switch keyguard on To switch keyguard offTo use your handset when the keyguard is on KeyguardEconomy mode Alarm clock To set economy modeTimer Caller Display Calls listTo view the Calls list You have the options toTo adjust keypad beeps and tones Ringer melody and volumeTo adjust ringer melody and volume To set the time Base settingsTo set the date Page Page To record your own outgoing message OGM To set the time and date Please seeTo listen to your outgoing message To delete your outgoing messageAt the handset Recording incoming messagesAt the base Incoming message indicator At the handset Playing your messagesUntil a long beep is heard Answering machine operation during message playbackTo play new messages from the handset To record a memo message At the handsetTo switch VIP on and off VIP featureTo set the VIP access code Remote access To change your Remote Access CodeHow to control answering machines functions Registering additional handsets Using additional handsets and basesUsing additional handsets and bases Base Handset On the handsetCode Guarantee General informationTechnical information Make sure the Post Office give you proof of postingSwitchboard external line access code Switchboard compatibilityTo set the external line access code RecallTo activate and de-activate the external line access code Wall mounting 122 mmIndex VIP
Top Page Image Contents