BT Diverse 1015 manual Installing the rechargeable batteries in the handset, Tab Slot

Page 12

Setting up

7Installing the rechargeable batteries in the handset

The handset uses the two AA size nickel cadmium (NiCad) batteries supplied. Hold the handset with the keypad facing down and slide up to open the battery compartment.

Insert the batteries as indicated on the label inside the battery compartment and slide the battery compartment cover shut.

Important

When replacing batteries always use good quality nickel cadmium (NiCad) rechargeable AA types with at least 600mAh capacity in order to achieve the specified operating time. Never use other batteries or conventional alkaline batteries.

They could result in a short circuit or destroy the battery casing. Recommended batteries are Panasonic P-50 AA, Sanyo N-3UN or N-3UC, Philips R6NC-P, SAFT RC 6, DAIMON Accu 1000 and UCAR RC 6. Batteries are available from the Diverse Helpline 0345 908070.

8 Fitting the handset carrying clip

Fit the carrying clip onto the back of the handset.

Tab

Slot

9Charge the handset batteries for at least 16 hours

Place the handset on the base. The handset can be charged face up or down.

When the handset batteries are charging, the green CHARGING light comes on – it goes off when the battery is fully charged. It will come on again occasionally to indicate that the battery is being topped up.

When the handset battery has been charged for 16 hours, the Diverse 1015 is ready to use.

Normal battery charging time

After charging your Diverse 1015 for the first time, normal charging time for the handset batteries is

4-5 hours. Batteries and case become warm during charging. This is normal and not dangerous.

Under ideal conditions, the handset batteries should give about 6.5 hours talktime or 60 hours standby on a single charge. However, new NiCad batteries do not reach their full capacity until they have been in normal use for several days.

9

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Diverse 1015 telephone User guidePage Page At a glance Last number redial KeypadBase unit Underside view Power cord Telephone line cord Skip This guide Hints and tips boxesIntroducing the Diverse1015 For your recordsBuilding up a phone system Date of purchase Place of purchase Serial numberSetting up Follow these steps to get your Diverse 1015 ready for usePlugging your Diverse 1015 into the phone socket Connecting the optional back-up box To connect the back-up boxConnecting the power cable Mounting the back-up boxInstalling the rechargeable batteries in the handset Normal battery charging timeFitting the handset carrying clip Charge the handset batteries for at least 16 hoursBattery low warning Getting the most out of your batteriesUsing your Diverse 1015 telephone ON/OFF and Protected modesTo make an external call To end a callTo receive an external call To redial the last numberPaging and internal calls To page a handset from the base unitTo make an internal intercom call to another handset To make an intercom call to the base unitTo make an internal intercom call to all handsets To transfer an external call between handsetsQuick call transfer Using the memory to store and dial numbers Or, to save scrolling through stored numbersTo store a number To speed dial a number stored in the memoryUsing and changing the system code and handset PIN If you want to use remote accessTo change a system code for the Diverse 1015 base unit Optional settings Adjusting ear piece volumeTo adjust the ringer volume in the handset To adjust the ringer volume in the base unit To adjust the tone of the handset ringerTo adjust the tone of the base unit ringer To switch the ‘confirmation’ tone on and offTo switch the ‘wrong button’ tone on and off To switch the battery warning tone on and offTo switch the ‘settings confirmation’ tone on and off To switch the ‘range warning’ tone on and offTo switch the ‘in-range’ tone on and off Call barring To cancel the call bar on all handsets To cancel call barring on an individual handsetTo bar all calls from an individual handset To store your own ‘special numbers’To clear your own ‘special numbers’ Using your Diverse1015 answering machine Outgoing messagesAdvisory announcement Recording an outgoing message/advisory announcementVoices says ÔRecording announcementÕ Or ifTo record your first outgoing message A1 To play back your first outgoing message A1To record a second outgoing message A2 To play back your second outgoing message A2To delete your second outgoing message A2 To switch the answering machine on/off To record an advisory announcement aTo play back your advisory announcement a To delete your advisory announcement aVoice says, ÔPlease enter the time using four digits.Õ To switch the day and time announcement off or onTo set the correct day and time on the answering machine To set the duration of incoming messages Recording memosTo record a memo When there are new messages At the baseAt any time you can To save messages at the base unit To delete a message at the base unitTo delete all messages which have been played back Press the STO button to confirm the setting At the base during playbackEither Enter 51 to insert a pause between messagesRemote access TouchtoneTM phoneFrom a Diverse handset Please noteRemote operation For helpTo play back new messages To play back all messagesTo select the operating mode Voice says, ÔOperation Mode. Advisory announcementÕTo mark a message as new To delete a message during playbackTo record a new outgoing message To record an advisory announcementTo play back an outgoing message/announcement To switch on your answering machine from another phone Voice says, ÔAnnouncement deletedÕTo delete an outgoing message/announcement To record a memo messageRemote access quick guide Additional features Using secrecy during an external callOperating with additional handsets To set which handset will receive ring priority To clear and reinstate handsets for collective ringingUsing your Diverse 1015 with a switchboard/PBX Setting the Tone or Pulse modeEntering PBX external access codes for older switchboards To set Pulse diallingFor use with switchboards/PBXs To set Time Break Recall with Tone diallingTo set to Earth Recall with Tone dialling During the callTo insert an access code Setting the access pauseAccess codes CodeRegistering a new Diverse handset with the base unit At the base unitAt the handset Diverse handsetsTo remove a handset registered at the base unit Operating with additional base units How to set up multiple base units and handsets At the base unitTo set your handset for automatic base selection To set your handset for manual base selection Maintenance Within the guarantee periodOutside the guarantee period GeneralSymbol is flashing or you cannot link up with the base unit HelpEmergency calls Replacing handset batteriesWhen connected to a PBX Technical information Environment How many phones can you have?Back-up box ApprovalConnecting to PBXs Technical specification Index Using your Diverse 1015 answering machine Remote accessRemote access contÕd Additional featuresOperating with additional base units MaintainanceHelp 51-52Mounting template 415

Diverse 1015 specifications

The BT Diverse 1015 is an advanced cordless telephone that exemplifies a blend of modern technology and user-friendly features, making it an appealing choice for both home and office environments. This innovative device is part of BT's Diverse series, known for its reliability and cutting-edge functionality.

One of the main features of the BT Diverse 1015 is its DECT (Digital Enhanced Cordless Telecommunications) technology, which ensures a secure and robust connection. DECT technology provides superior sound quality, allowing users to enjoy clear conversations without any interference. The telephones are designed to offer up to 300 meters of range outdoors and around 50 meters indoors, ensuring freedom of movement throughout the premises.

Another notable characteristic of the BT Diverse 1015 is its ability to support multiple handsets. Users can seamlessly register up to five handsets to a single base unit, enabling them to have phones in various rooms, increasing accessibility and convenience. The handset has a large, easy-to-read LCD display that provides essential information such as caller ID and battery status, making it easier for users to manage their calls.

The BT Diverse 1015 also comes equipped with a built-in answering machine, offering up to 15 minutes of recording time. This feature allows users to receive messages even when they are unable to answer the phone. Additionally, the telephone offers a range of caller features, including a phonebook that can store up to 50 names and numbers, and a last number redial option, facilitating easy call management.

Moreover, the BT Diverse 1015 is designed with user convenience in mind. The phone includes a number of customizable features, such as ringtones and volume levels, providing users with the ability to personalize their phone experience. The speakerphone function allows for hands-free conversations, making it easier to multitask while on the phone.

In terms of power management, the BT Diverse 1015 ensures long-lasting performance, with rechargeable batteries that offer extended talk and standby time. The sleek design of the handset adds a touch of elegance while maintaining ergonomic appeal for comfortable handling.

In summary, the BT Diverse 1015 is a well-rounded cordless telephone that integrates advanced technology with user-focused features. Its DECT technology, multiple handset capability, integrated answering machine, and customizable options make it a strong contender in the market for anyone seeking a functional and reliable communication device.
Top Page Image Contents