BT Diverse 1015 manual How to set up multiple base units and handsets, At the base unit

Page 50

Operating with additional base unit

How to set up multiple base units and handsets

To register additional Diverse 1015 handsets at more than one base unit

You can use up to six handsets on each Diverse base unit and up to four base stations with your Diverse handset to build up a comprehensive and easy-to-use cordless telephone system.

The handset supplied with the base unit is already registered as handset 1.

The handset you wish to register onto another base unit must be turned OFF, before proceeding to register the handset.

At the base unit:

•Press and hold down the green paging button until you hear the beeps (after about 10 seconds).

You now have up to 1 minute to register the handset, during which the beeps will continue.

At the handset:

PWR

•Press and hold down the button number 2, 3 or 4 to specify the base unit number.

•At the same time, hold down the PWR button until the display shows

2

•Enter the system code. (Factory setting is 0000. To change it see page 16.)

•Press the # button. The beep stops after a few seconds. The display shows all available handset numbers.

2 3 4 5 6

•Enter the single digit internal number – from 2 to 6 – for the additional handset.

•It is now registered.

If the maximum number of handsets are already registered with the base, three dashes will appear in the display after you enter the system code.

47

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Diverse 1015 telephone User guidePage Page At a glance Last number redial KeypadBase unit Underside view Power cord Telephone line cord Skip This guide Hints and tips boxesBuilding up a phone system Introducing the Diverse1015For your records Date of purchase Place of purchase Serial numberPlugging your Diverse 1015 into the phone socket Setting upFollow these steps to get your Diverse 1015 ready for use Connecting the optional back-up box To connect the back-up boxConnecting the power cable Mounting the back-up boxFitting the handset carrying clip Installing the rechargeable batteries in the handsetNormal battery charging time Charge the handset batteries for at least 16 hoursBattery low warning Getting the most out of your batteriesUsing your Diverse 1015 telephone ON/OFF and Protected modesTo receive an external call To make an external callTo end a call To redial the last numberTo make an internal intercom call to another handset Paging and internal callsTo page a handset from the base unit To make an intercom call to the base unitQuick call transfer To make an internal intercom call to all handsetsTo transfer an external call between handsets To store a number Using the memory to store and dial numbersOr, to save scrolling through stored numbers To speed dial a number stored in the memoryTo change a system code for the Diverse 1015 base unit Using and changing the system code and handset PINIf you want to use remote access To adjust the ringer volume in the handset Optional settingsAdjusting ear piece volume To adjust the tone of the base unit ringer To adjust the ringer volume in the base unitTo adjust the tone of the handset ringer To switch the ‘confirmation’ tone on and offTo switch the ‘settings confirmation’ tone on and off To switch the ‘wrong button’ tone on and offTo switch the battery warning tone on and off To switch the ‘range warning’ tone on and offTo switch the ‘in-range’ tone on and off Call barring To bar all calls from an individual handset To cancel the call bar on all handsetsTo cancel call barring on an individual handset To store your own ‘special numbers’To clear your own ‘special numbers’ Advisory announcement Using your Diverse1015 answering machineOutgoing messages Recording an outgoing message/advisory announcementTo record your first outgoing message A1 Voices says ÔRecording announcementÕOr if To play back your first outgoing message A1To delete your second outgoing message A2 To record a second outgoing message A2To play back your second outgoing message A2 To play back your advisory announcement a To switch the answering machine on/offTo record an advisory announcement a To delete your advisory announcement aTo set the correct day and time on the answering machine Voice says, ÔPlease enter the time using four digits.ÕTo switch the day and time announcement off or on To record a memo To set the duration of incoming messagesRecording memos At any time you can When there are new messagesAt the base To delete all messages which have been played back To save messages at the base unitTo delete a message at the base unit Either Press the STO button to confirm the settingAt the base during playback Enter 51 to insert a pause between messagesFrom a Diverse handset Remote accessTouchtoneTM phone Please noteTo play back new messages Remote operationFor help To play back all messagesTo mark a message as new To select the operating modeVoice says, ÔOperation Mode. Advisory announcementÕ To delete a message during playbackTo play back an outgoing message/announcement To record a new outgoing messageTo record an advisory announcement To delete an outgoing message/announcement To switch on your answering machine from another phoneVoice says, ÔAnnouncement deletedÕ To record a memo messageRemote access quick guide Operating with additional handsets Additional featuresUsing secrecy during an external call To set which handset will receive ring priority To clear and reinstate handsets for collective ringingEntering PBX external access codes for older switchboards Using your Diverse 1015 with a switchboard/PBXSetting the Tone or Pulse mode To set Pulse diallingTo set to Earth Recall with Tone dialling For use with switchboards/PBXsTo set Time Break Recall with Tone dialling During the callAccess codes To insert an access codeSetting the access pause CodeAt the handset Registering a new Diverse handset with the base unitAt the base unit Diverse handsetsTo remove a handset registered at the base unit Operating with additional base units How to set up multiple base units and handsets At the base unitTo set your handset for automatic base selection To set your handset for manual base selection Outside the guarantee period MaintenanceWithin the guarantee period GeneralEmergency calls Symbol is flashing or you cannot link up with the base unitHelp Replacing handset batteriesWhen connected to a PBX Back-up box Technical informationEnvironment How many phones can you have? ApprovalConnecting to PBXs Technical specification Index Using your Diverse 1015 answering machine Remote accessRemote access contÕd Additional featuresHelp Operating with additional base unitsMaintainance 51-52Mounting template 415

Diverse 1015 specifications

The BT Diverse 1015 is an advanced cordless telephone that exemplifies a blend of modern technology and user-friendly features, making it an appealing choice for both home and office environments. This innovative device is part of BT's Diverse series, known for its reliability and cutting-edge functionality.

One of the main features of the BT Diverse 1015 is its DECT (Digital Enhanced Cordless Telecommunications) technology, which ensures a secure and robust connection. DECT technology provides superior sound quality, allowing users to enjoy clear conversations without any interference. The telephones are designed to offer up to 300 meters of range outdoors and around 50 meters indoors, ensuring freedom of movement throughout the premises.

Another notable characteristic of the BT Diverse 1015 is its ability to support multiple handsets. Users can seamlessly register up to five handsets to a single base unit, enabling them to have phones in various rooms, increasing accessibility and convenience. The handset has a large, easy-to-read LCD display that provides essential information such as caller ID and battery status, making it easier for users to manage their calls.

The BT Diverse 1015 also comes equipped with a built-in answering machine, offering up to 15 minutes of recording time. This feature allows users to receive messages even when they are unable to answer the phone. Additionally, the telephone offers a range of caller features, including a phonebook that can store up to 50 names and numbers, and a last number redial option, facilitating easy call management.

Moreover, the BT Diverse 1015 is designed with user convenience in mind. The phone includes a number of customizable features, such as ringtones and volume levels, providing users with the ability to personalize their phone experience. The speakerphone function allows for hands-free conversations, making it easier to multitask while on the phone.

In terms of power management, the BT Diverse 1015 ensures long-lasting performance, with rechargeable batteries that offer extended talk and standby time. The sleek design of the handset adds a touch of elegance while maintaining ergonomic appeal for comfortable handling.

In summary, the BT Diverse 1015 is a well-rounded cordless telephone that integrates advanced technology with user-focused features. Its DECT technology, multiple handset capability, integrated answering machine, and customizable options make it a strong contender in the market for anyone seeking a functional and reliable communication device.
Top Page Image Contents