Making and receiving calls
To make an external call
Ensure the handset is switched ON.
•Press the PHONE button. You hear the dial tone. The ‘In Use’ light on the base unit comes on. Display shows EXT.
•Dial the number. The phone calls the number and the display shows the number you have dialled.
Alternatively, you can enter the phone number you want first and then press the PHONE button to dial.
If another handset is already being used to make an external call, your handset will display ÔÐÕ flashing and you will hear the internal ÔbusyÕ signal.
If connected to a switchboard with pulse dialling, you can switch to tone dialling during a call by pressing the ✱ button. This enables you to use systems such as home banking. The Diverse 1015 will return to pulse dialling on completion of the call.
To end a call
•Press the PHONE button
or
•Place the handset back on the base unit.
Using your
Diverse 1015
To receive an external call
EXT
When the phone rings the display flashes EXT. Press the PHONE button on the handset and speak
or
If the handset is on the base unit or charging unit, simply lift it up and speak. You do not need to press the PHONE button.
At the end of the call, either press the PHONE button or replace the handset on the base unit.
To redial the last number
LNR
•Press the PHONE button.
•Press the LNR button. The last number you called will be redialled automatically.
To redial any of the last three numbers
LNR
•Press and release the LNR button to display the last three phone numbers in turn. Each phone number can be up to 22 digits long.
•When the number you want to dial is displayed, press the PHONE button.
To end the call, press the PHONE button or replace the handset on the base.
12