INITIAL PROGRAMMING
Before using this telephone, the following initial settings must be completed: volume level, ring volume, ring tone, auto answer, key tone, key lock, handset name, language, phone book, call log, message waiting, and dial mode. The last 4 settings are stored on the base unit and control all handsets. The other settings must be set for each handset individually.
Language
1.Press MENU/OK to enter the options menu.
2.Scroll 
or 
until you see “LANGUAGE.”
3.Press MENU/OK to enter settings.
4.Press 
or 
to select the desired language (English, Spanish, or French). The default is English.
5.Press MENU/OK to confirm.
Handset name
You can use up to 16 characters to name a handset, the name will appear on the handset display screen in standby mode. To name your handset:
1.Press the MENU/OK key.
2.Press 
or 
to select “HANDSET NAME”.
3.Press MENU/OK to begin settings, “NAME” will appear.
4.Enter a name for your handset.
Note: refer to Storing a name / number in the directory | section for details |
about how to input characters on page 18. |
|
5. Press MENU/OK to save the name. |
|
Dial mode |
|
This phone is compatible with
1.Press the MENU/OK key.
2.Press 
or 
to select “DIALING” from the options.
3.Press the MENU/OK key.
4.Press 
or 
to select “DIAL METHOD” from the submenu.
5.Press MENU/OK.
6.Press 
or 
to select “PULSE” or “DTMF” mode.
7.Press MENU/OK to confirm your selection.
8. | To return to standby mode, press | C repeatedly. |
11