Sanyo LNS-W10 Way conference call, Call Waiting, Transferring call between handsets, INT for

Page 23

MULTI-HANDSET CONFIGURATION

3-way conference call

If you have 2 handsets registered with the base unit, you can make 3-way conference calls between an external call party and two internal handset holders. To initiate a 3- way conference call:

1.Establish contact with the external party by either placing a call to that person, or answering an incoming call.

2.

Press INT then press

or to choose a handset name, press

TALK to connect

 

to the selected handset.

 

 

 

Result : The handset you paged rings. The internal party can answer the call by

 

pressing the TALK key.

 

 

3.

The caller who made the conference call should press and hold

INT for

approximately 2 seconds until “CONFERENCE CALL” shows on the display and you hear a confirmation beep on the earpiece.

Result : All three parties are connected and can talk together.

Tip: You can end a 3-way conference call exactly as you would any other call. Just press TALK. The connection continues between the remaining handset and the external party.

Tip: If a handset is connected to an external line, you can initiate a conference

call from another handset by simply picking up the handset and pressing TALK. The first handset can hear a beeping sound and “ CONFERENCE CALL” shows

on the display.

Call Waiting

If you receive an external call while you are talking to someone through the intercom, you will hear a call waiting tone. To end the intercom call and answer the external call, press TALK key on any handset. The other handset will beep and “BUSY” will show on the screen. To end the intercom call without answering the external call,

press and hold INT for several seconds. Please also see the Caller ID with Call Waiting section on page 17 for more information.

Transferring call between handsets

You can transfer an external call from one handset to another if you have 2 handsets

registered with the base unit. To transfer a call:

 

1.

During a telephone conversation, press the

INT key to place the caller on hold.

2.Press or to choose the handset name to which you wish to transfer the call.

3.Press TALK. Then wait for the other handset to answer. The handset you

paged will ring, with “INTERNAL CALL” showing on the LCD display. Another party can answer the call by pressing TALK.

23

Image 23
Contents Sanyo Canada Inc GHzTable of Contents Causes of Poor Reception ...………………..……………………30 Compander Plus Noise Reduction Main Features GHz TechnologyOther features IntroductionModular jack Checking package contentsGetting Started Choosing a location for the base unit and handset cradle Connecting the base unitConnecting the handset cradle Batteries Charging the handset batteries Handset Names and ControlsBase unit Handset name Dial modeInitial Programming LanguageHandset ring tone Flash timeKey lock Key toneTip To return to standby mode, press Handset ring volume levelEarpiece volume level Auto answer on / offReceiving a call Standby modeBasics Clear message waitingTalk key Correcting a dialing errorMaking a call Returning missed callsHandset locator page key Low battery warningVoice mail indicator Mute key CReviewing Caller ID list Caller ID FeaturesCaller ID with Call Waiting Caller ID listDeleting the displayed entry DirectoryDeleting entries from the Caller ID list Storing a name / number in the directoryTip Key Key of times pressedStoring caller ID entries in the directory Making calls from the directoryDeleting an entry Changing a stored entryIntercom internal call MULTI-HANDSET ConfigurationRegistering a handset Identifying a handset on the networkCall toggling Intercom ring toneINT for Way conference callCall Waiting Transferring call between handsetsDisplay. Another party can answer the call by pressing Changing the Handset BatteryBattery replacement and handling Call backHeadset connection headset not included Replacing the batteryRecycling NICKEL-METAL Hydride Batteries Headset Jack and Belt ClipLCD Screen Messages Power FailureCHARGE/IN USE LED on the base Light SignalsDial tone is OK, but cannot dial out Sound SignalsTroubleshooting No dial tonePhone beeps Handset does not ringCall was disconnected Keys do not workNo Caller ID display Cannot register handsetCannot dial out Caller ID error message MaintenanceMaximize Battery Performance Do not replace the handset in the base after each call Charge the battery for a full 15 continuous hoursKeep the contacts clean Refresh batteryREN Number Technical InformationWarranty Application Sanyo Comfort WarrantyWhat is not Covered Nationwide Customer Support SOS Help Line