Sanyo LNS-W10 Making a call, Correcting a dialing error, Returning missed calls, Talk key

Page 15

BASICS

Making a call

1.Press TALK to get a dial tone then enter the number, OR dial the number first

(up to 24 digits) then press TALK.

2.To end the call, press TALK again or place the handset on the base cradle, the handset will automatically hang up. “ENDED” will appear on the display to confirm that the call has ended.

Tip: The handset will display the total amount of time elapsed for each call.

Note: You can use this telephone with a PABX (Private Automatic Branch Exchange) or local telephone network. Use of your telephone with a modern system does not require special adjustment; however, with certain older systems, you may need to insert a pause between the prefix and the rest of the number. Enter a dial pause of 3 seconds by pressing REDIAL / PAUSE . A “P” will be entered after the number to show that a pause has been inserted.

Correcting a dialing error

You can correct a dialing error before the number has been dialed i.e. before pressing talk. To correct a dialing error you can do one of the following:

Press the FLASH/DEL key to clear the digits one by one.

Press and hold FLASH/DEL to clear all the digits at once.

Press C to clear all the digits at once

Redialing (up to 24 digits)

To redial one of the last 5 numbers called, you can do one of the following:

1.Make sure the phone is OFF (not in TALK mode).

2.

Press REDIAL/PAUSE repeatedly to select a desired last number, then press

 

TALK to redial the last number.

 

OR

 

 

1.

Make sure the phone is ON by pressing

TALK.

2.

Press REDIAL/PAUSE repeatedly to scroll through a list of numbers, then

 

press MENU/OK to redial the last number.

 

Returning missed calls

If you subscribe to a Caller ID service through your local network provider this telephone can keep track of missed call information. When you miss a call, the handset will display “New Calls” along with the number of calls you missed. To review

a call history with Caller ID information, press

. Then press

or to review. To dial

the selected number, press the

TALK key.

 

 

15

Image 15
Contents Sanyo Canada Inc GHzTable of Contents Causes of Poor Reception ...………………..……………………30 Compander Plus Noise Reduction Main Features GHz TechnologyOther features IntroductionChecking package contents Getting StartedModular jack Choosing a location for the base unit and handset cradle Connecting the base unitConnecting the handset cradle Batteries Charging the handset batteries Handset Names and ControlsBase unit Handset name Dial modeInitial Programming LanguageHandset ring tone Flash timeKey lock Key toneTip To return to standby mode, press Handset ring volume levelEarpiece volume level Auto answer on / offReceiving a call Standby modeBasics Clear message waitingTalk key Correcting a dialing errorMaking a call Returning missed callsHandset locator page key Low battery warningVoice mail indicator Mute key CReviewing Caller ID list Caller ID FeaturesCaller ID with Call Waiting Caller ID listDeleting the displayed entry DirectoryDeleting entries from the Caller ID list Storing a name / number in the directoryTip Key Key of times pressedStoring caller ID entries in the directory Making calls from the directoryDeleting an entry Changing a stored entryIntercom internal call MULTI-HANDSET ConfigurationRegistering a handset Identifying a handset on the networkCall toggling Intercom ring toneINT for Way conference callCall Waiting Transferring call between handsetsDisplay. Another party can answer the call by pressing Changing the Handset BatteryBattery replacement and handling Call backHeadset connection headset not included Replacing the batteryRecycling NICKEL-METAL Hydride Batteries Headset Jack and Belt ClipLCD Screen Messages Power FailureCHARGE/IN USE LED on the base Light SignalsDial tone is OK, but cannot dial out Sound SignalsTroubleshooting No dial tonePhone beeps Handset does not ringCall was disconnected Keys do not workCannot register handset Cannot dial outNo Caller ID display Maintenance Maximize Battery PerformanceCaller ID error message Do not replace the handset in the base after each call Charge the battery for a full 15 continuous hoursKeep the contacts clean Refresh batteryREN Number Technical InformationWarranty Application Sanyo Comfort WarrantyWhat is not Covered Nationwide Customer Support SOS Help Line